Axis Q1932-E PT 0702-001 Scheda Tecnica
Codici prodotto
0702-001
Technical Specifications - AXIS Q1932-E/Q1932-E PT Mount
Models
AXIS Q1932-E
AXIS Q1932-E PT Mount
Lens models 10 mm, 19 mm, 35 mm and 60 mm
AXIS Q1932-E PT Mount
Lens models 10 mm, 19 mm, 35 mm and 60 mm
Camera
Image sensor
Uncooled Micro bolometer 640x480, pixel pitch: 17µm
Lens
10 mm: 57° view
a
, F1.2
19 mm: 32° view
, F1.0
35 mm: 18° view
, F1.2
60 mm: 10° view
, F1.25
Sensitivity
NETD < 75 mK
Pan/Tilt/Zoom
AXIS Q1932-E PT Mount: Preset positions, Guard tour, Driver
selection, Control queue
selection, Control queue
Video
Video
compression
compression
H.264 (MPEG-4 Part 10/AVC), H.264 Main and Baseline Profile
Motion JPEG
Motion JPEG
Resolutions
Sensor is 640x480. Image can be scaled up to 800x600 (SVGA)
Frame rate
Up to 30 fps within EU, Norway, Switzerland, Canada, USA,
Japan, Australia, New Zealand
Up to 8.3 fps in other countries
Japan, Australia, New Zealand
Up to 8.3 fps in other countries
b
Video streaming At least three H.264 and Motion JPEG streams using the same
palette, simultaneous and individually configured in max.
resolution at 30 fps
Controllable frame rate and bandwidth, VBR/CBR H.264
resolution at 30 fps
Controllable frame rate and bandwidth, VBR/CBR H.264
Image settings
Compression, Brightness, Contrast, Exposure control, Rotation,
Mirroring of images, Multiple palettes, Text and image overlay,
Privacy mask
AXIS Q1932-E: Axis' Corridor Format
Mirroring of images, Multiple palettes, Text and image overlay,
Privacy mask
AXIS Q1932-E: Axis' Corridor Format
Audio
Audio streaming AXIS Q1932-E: Two-way, full duplex
Audio
compression
compression
AXIS Q1932-E: AAC LC 8/16 kHz, G.711 PCM 8 kHz, G.726
ADPCM 8 kHz
Configurable bit rate
ADPCM 8 kHz
Configurable bit rate
Audio
input/output
input/output
AXIS Q1932-E: External microphone or line input, line output
Network
Security
Password protection, IP address filtering, HTTPS
c
encryption,
IEEE 802.1X
network access control, Digest authentication, User
access log
Supported
protocols
protocols
IPv4/v6, HTTP, HTTPS
, QoS Layer 3 DiffServ, FTP,
CIFS/SMB, SMTP, Bonjour, UPnP
TM
, SNMPv1/v2c/v3 (MIB-II),
DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP,
ARP, SOCKS, SSH
ARP, SOCKS, SSH
System integration
Application
Programming
Interface
Programming
Interface
Open API for software integration, including VAPIX®
and AXIS Camera Application Platform; specifications at
www.axis.com
AXIS Video Hosting System (AVHS) with One-Click Camera
Connection
ONVIF Profile S; specification at www.onvif.org
and AXIS Camera Application Platform; specifications at
www.axis.com
AXIS Video Hosting System (AVHS) with One-Click Camera
Connection
ONVIF Profile S; specification at www.onvif.org
Intelligent video Video motion detection, Cross line detection, Shock detection,
AXIS Camera Application Platform enabling installation of
additional applications
AXIS Q1932-E: Audio detection
additional applications
AXIS Q1932-E: Audio detection
Event triggers
Intelligent video, Temperature, External input, Time scheduled,
Shock detection, Edge storage events
AXIS Q1932-E: Audio
AXIS Q1932-E PT Mount: PTZ preset
Shock detection, Edge storage events
AXIS Q1932-E: Audio
AXIS Q1932-E PT Mount: PTZ preset
Event actions
File upload: FTP, HTTP, network share and email
Notification: email, HTTP and TCP
External output activation
Pre- and post-alarm video buffering
Video recording to edge storage
AXIS Q1932-E: Audio recording to edge storage
AXIS Q1932-E PT Mount: PTZ preset, Guard tour
External output activation
Pre- and post-alarm video buffering
Video recording to edge storage
AXIS Q1932-E: Audio recording to edge storage
AXIS Q1932-E PT Mount: PTZ preset, Guard tour
Data streaming
Event data
General
Casing
IP66-rated metal casing (Aluminium) with integrated
dehumidifying membrane and a germanium window
Color: White NCS S 1002-B
dehumidifying membrane and a germanium window
Color: White NCS S 1002-B
Memory
256 MB RAM, 128 MB Flash
Power
Power over Ethernet IEEE 802.3af/802.3at Type 1 Class 3,
max. 10 W
8-28 V DC, max. 11 W or 20-24 V AC 50-60 Hz, max. 15 VA,
power supply not included
max. 10 W
8-28 V DC, max. 11 W or 20-24 V AC 50-60 Hz, max. 15 VA,
power supply not included
Connectors
RJ45 10BASE-T/100BASE-TX PoE, terminal block for power
AXIS Q1932-E: Eight circuit PCB header for two configurable
inputs/outputs and audio
AXIS Q1932–E PT Mount: RS485/RS422 for pan/tilt control
AXIS Q1932-E: Eight circuit PCB header for two configurable
inputs/outputs and audio
AXIS Q1932–E PT Mount: RS485/RS422 for pan/tilt control
Edge storage
microSD/microSDHC/microSDXC slot supporting memory card up
to 64 GB (card not included)
Support for recording to dedicated network-attached storage
(NAS)
to 64 GB (card not included)
Support for recording to dedicated network-attached storage
(NAS)
Operating
conditions
conditions
-40 °C to 60 °C (-40 °F to 140 °F)
Humidity 10-100% RH (condensing)
Humidity 10-100% RH (condensing)
Approvals
EN 55022 Class A, EN 50121-4, EN 55024, EN 61000-3-2,
EN 61000-3-3, EN 61000-6-1, EN 61000-6-2,
FCC Part 15 Subpart B Class A, ICES-003 Class A, VCCI Class A,
C-tick AS/NZS CISPR22 Class A, KCC KN22 Class A, KN24,
IEC/EN/UL 60950-1, IEC/EN/UL 60950-22, EN 50581,
IEC 60529 IP66, NEMA 250 Type 4X, IEC 60068-2-1,
IEC 60068-2-2, IEC 60068-2-6 Class 4M4, IEC 60068-2-27,
IEC 60068-2-52, IEC 60721-3-4 Class 4K3
EN 61000-3-3, EN 61000-6-1, EN 61000-6-2,
FCC Part 15 Subpart B Class A, ICES-003 Class A, VCCI Class A,
C-tick AS/NZS CISPR22 Class A, KCC KN22 Class A, KN24,
IEC/EN/UL 60950-1, IEC/EN/UL 60950-22, EN 50581,
IEC 60529 IP66, NEMA 250 Type 4X, IEC 60068-2-1,
IEC 60068-2-2, IEC 60068-2-6 Class 4M4, IEC 60068-2-27,
IEC 60068-2-52, IEC 60721-3-4 Class 4K3
Weight
AXIS Q1932–E 10 mm: 2000 g (4.4 lb)
AXIS Q1932–E 19 mm: 2000 g (4.4 lb)
AXIS Q1932–E 35 mm: 2100 g (4.6 lb)
AXIS Q1932–E 60 mm: 2200 g (4.9 lb)
AXIS Q1932–E PT Mount 10 mm: 1800 g (4.0 lb)
AXIS Q1932–E PT Mount 19 mm: 1800 g (4.0 lb)
AXIS Q1932–E PT Mount 35 mm: 1900 g (4.2 lb)
AXIS Q1932–E PT Mount 60 mm: 2000 g (4.4 lb)
AXIS Q1932–E 19 mm: 2000 g (4.4 lb)
AXIS Q1932–E 35 mm: 2100 g (4.6 lb)
AXIS Q1932–E 60 mm: 2200 g (4.9 lb)
AXIS Q1932–E PT Mount 10 mm: 1800 g (4.0 lb)
AXIS Q1932–E PT Mount 19 mm: 1800 g (4.0 lb)
AXIS Q1932–E PT Mount 35 mm: 1900 g (4.2 lb)
AXIS Q1932–E PT Mount 60 mm: 2000 g (4.4 lb)
Included
accessories
accessories
Installation Guide, Installation and Management Software CD,
Windows decoder 1-user license, AXIS Cross Line Detection
license, AXIS Video Motion Detection 2.1, Torx T20 screw driver
AXIS Q1932-E: Wall and ceiling mount bracket, Pipe converter
for US, RJ45 network cable 5 m (16 ft)
Windows decoder 1-user license, AXIS Cross Line Detection
license, AXIS Video Motion Detection 2.1, Torx T20 screw driver
AXIS Q1932-E: Wall and ceiling mount bracket, Pipe converter
for US, RJ45 network cable 5 m (16 ft)
Video
management
software
management
software
AXIS Camera Companion (included), AXIS Camera Station
and video management software from Axis’ Application
Development Partners (not included). For more information, see
www.axis.com/products/video/software
and video management software from Axis’ Application
Development Partners (not included). For more information, see
www.axis.com/products/video/software
Warranty
Axis 3-year warranty and AXIS Extended Warranty option,see
www.axis.com/warranty
www.axis.com/warranty
a. Horizontal angle of view
b. Frame rate above 9 fps may be subject to export control regulations
c. This product includes software developed by the OpenSSL Project for use in the
OpenSSL Toolkit (http://www.openssl.org/), and cryptographic software written by
Eric Young (eay@cryptsoft.com).
More information is available at www.axis.com
www.axis.com
©2014 Axis Communications AB. AXIS COMMUNICATIONS, AXIS, ETRAX, ARTPEC and VAPIX are registered trademarks or
trademark applications of Axis AB in various jurisdictions. All other company names and products are trademarks or registered
trademarks of their respective companies. We reserve the right to introduce modifications without notice.
trademark applications of Axis AB in various jurisdictions. All other company names and products are trademarks or registered
trademarks of their respective companies. We reserve the right to introduce modifications without notice.
578
10/EN/M2.2/0
720
14