Dialight HBGCMP HBGCMP-EUH-DE Manuale Utente
Codici prodotto
HBGCMP-EUH-DE
Mechanical, Electrical and Photometric information is the same
on page 1 except where detail is provided
on page 1 except where detail is provided
Variable Dimming Cable:
Dimming connections included in
factory installed 5 core cable. Multiple
high bays can be connected to the
same dimmer, consult dimming
instructions and manufacturer
factory installed 5 core cable. Multiple
high bays can be connected to the
same dimmer, consult dimming
instructions and manufacturer
Variable Dimming
Control:
0-10 V DC active
Typical Dimming Range:
10V DC = 100% light output
0V DC = 20% light output and
power consumption
DuroSite
®
LED High Bay Options and Accessories
Variable Dimming: 0-10V DC
Dialight offers a series of High Bay products with ACTIVE Dimming. Dimming
permits the user to select a specific light output and power consumption to
meet their requirements. The reduction in light output and power
consumption are approximately proportional. Reducing the light output by
50% will reduce the power consumption by 50%. LEDs are particularly well
suited for dimming as compared to other industrial light sources.
permits the user to select a specific light output and power consumption to
meet their requirements. The reduction in light output and power
consumption are approximately proportional. Reducing the light output by
50% will reduce the power consumption by 50%. LEDs are particularly well
suited for dimming as compared to other industrial light sources.
STEP Dimming Mode
The variable dimming High Bays may also be configured to operate in a
single STEP Dimming configuration. When the dimming control conductors
are connected together, the light output will be reduced to approximately
20% of the maximum light output. The total fixture power consumption will
also be reduced to approximately 20% (30 W). Connecting the leads
together can be
single STEP Dimming configuration. When the dimming control conductors
are connected together, the light output will be reduced to approximately
20% of the maximum light output. The total fixture power consumption will
also be reduced to approximately 20% (30 W). Connecting the leads
together can be
accomplished with a common wall switch.
Features and Benefits
•
3 meter, 5 core PVC cable pre-installed
•
Multiple High Bays can be connected to the same dimmer
•
May also be configured to operate in a single STEP Dimming
configuration, please consult technical department
5
www.dialight.com
Dimensions in mm [inches]