Tripp Lite 17.3kW 3-Phase Switched PDU, 240V Outlets (24-C13 & 6-C19), L22-30P, 415V Input, 6ft Cord, 0U Vertical PDU3XVSR6L2230B Manuale Utente

MODEL NUMBER: PDU3XVSR6L2230B

 

 

 

Tripp Lite 3 phase Switched PDU / Power Distribution Unit offers advanced network control and monitoring with

the ability to turn on, turn off, recycle or lock-out power to each individual receptacle, monitor site electrical

conditions and remotely monitor output power consumption per-phase or per-receptacle. PowerAlert interface

supports remote control and custom notification of user-specified conditions via email, secure web, SNMP,

Telnet or SSH interface. Individually switched outlets can be controlled in real-time to remotely reboot

unresponsive network hardware, or be custom programmed for user-defined power-up and power-down

sequences to ensure proper startup of interdependent IT systems and prevent inrush-related overloads as

network equipment is first energized. Unused PDU outlets can be electronically locked off to prevent the

connection of unauthorized hardware. PDU output current consumption in amps per-phase or per-receptacle can

be displayed locally via visual meter or remotely via web/network interface to warn of potential overloads before

critical IT mains or branch breakers trip. Highly accurate current metering offers +/-1% billing-grade current

monitoring and recording ability for each output phase, breakered load bank and individual outlet. 

17.3kW Switched 415V input 240V output PDU with built-in web/network interface

Attached NEMA L22-30P (3P+N+E) 415V 3 phase input; 6ft. / 1.8m cord

0U, 70 inch / 178cm vertical form factor

30 switched 240V outlets (24 C13, 6 C19) in 6 separately breakered 20A single phase load banks

Supports power-on, power-off or reboot of each outlet on a real-time or programmable basis

Enables reboot of locked equipment, custom power-on/power-off sequences, load shedding of optional loads and disabling unused outlets

Network interface provides PDU control and data regarding input voltage and load levels per-outlet, per-breaker and per-phase

Built-in local digital display and remote web/network interface reports detailed voltage, amperage and kilowatt output values per outlet, per breaker and

per phase with additional reporting options for power unbalance percentage, IP address and sensor based temperature and humidity data (requires

ENVIROSENSE sensor)

Switched 17.3kW 3-Phase 415V

input, 240V output PDU

Reports voltage, frequency &

load per-outlet or per phase via

ethernet interface

1% billing-grade accuracy; Digital

display reports detailed status

information

70in / 1778mm 0U vertical format;

Toolless button-mount installation

24 C13 & 6 C19 single phase

outlets; Plug-lock cable retention

inserts

NEMA L22-30P 3 phase input; 6ft

1.8m line cord

 Ideal for 3-phase network

configurations in datacenters and

heavily configured equipment racks.

Switched, vertical rackmount

PDU with pre-installed mounting

buttons

24 C13/C14 and 6 C19/C20

Plug-lock cable retention inserts

 Spare installation buttons (2

9mm / 4 6mm), Mounting

brackets

Configuration cable

Owner's manual

1 / 4