Fracarro DVB-S ontvanger FTA, TS Out 283954 Manuale Utente
Codici prodotto
283954
Receiver DVB-S
TS
SIG7330
The SIG7330 module distributes a free-to-air
signal from a DVB-S source
It enables the audio/video signal to be available as
a transport stream in MPEG2/MPEG4 format,
distributed from the back panel.
In a typical application it can be connected to an
SIG7120 module (modulator) that uses the
transport stream to create a COFDM multiplex. It
can also be connected to an IP encoder SIG7720
creating multiple IP multicast streams.
It can also be installed as a single unit to distribute
one program through RCA outputs (for MPEG-2
compressed programs).
signal from a DVB-S source
It enables the audio/video signal to be available as
a transport stream in MPEG2/MPEG4 format,
distributed from the back panel.
In a typical application it can be connected to an
SIG7120 module (modulator) that uses the
transport stream to create a COFDM multiplex. It
can also be connected to an IP encoder SIG7720
creating multiple IP multicast streams.
It can also be installed as a single unit to distribute
one program through RCA outputs (for MPEG-2
compressed programs).
Main Specifications
-
QPSK satellite receiver with transport stream
output via the back panel
output via the back panel
-
Developed mainly for QPSK to COFDM
transmodulation for FTA programs
transmodulation for FTA programs
-
Compatible with MPEG2/MPEG4 compression
-
It can generate 14 or 18V, 22KHz tone and
DiSEqC 1.0, suitable to power an LNB or to
control multiswitch output
DiSEqC 1.0, suitable to power an LNB or to
control multiswitch output
-
Remote configuration and monitoring (via controller
host SIG7905 and FHM software)
host SIG7905 and FHM software)
-
Loop-through input for the connection of several
receivers on the same SAT polarity
receivers on the same SAT polarity
-
RCA outputs for testing or the distribution of one
MPEG2 compressed program
MPEG2 compressed program
-
HD compliant
SIG7330
Fracarro code
283954
SAT Input
Frequency input
MHz
950 - 2150
Minimum frequency step tuning
MHz
1
AFC
MHz
±5
Input level
dBµV
48 - 85
Loop-through insertion loss
dB
2 maximum
Symbol rate
MSy/s
2 – 40
FEC
1/2, 2/3, 3/4, 5/6, 7/8, auto
LNB power supply
0/14/18Vdc, 0-22KHz – max 200mA @ 14Vdc
DiSEqC
1.0 (4 position)