Geovision GV-MOUNT203 Manuale Utente
104
1. Assemble the camera with the dome housing. See
4.1 Assembling the Fisheye Camera
with the Dome Housing.
2. Assemble the tube (GV-Mount101, No. 2) and the tube connector (GV-Mount101, No. 3).
3. Thread the camera cable through the tube and secure the tube to the end of the housing
cap (GV-Mount903, No.2) with M6 screws (GV-Mount903, No. 4).
4. Thread the camera cable through the mounting bracket (GV-Mount101, No. 1) and
assemble the tube with the mounting bracket.
5. Make sure the tubes are properly screwed and tighten the torxes using the supplied torx
wrench (GV-Mount101, No. 4).
6. Secure the assembled camera to a desired location with 4 self-prepared screws.
7. Refer to the indicated sections of the
GV-Fisheye IP Camera H.264 User’s Manual on the
software CD to:
A. Connect the network, power and other cables to the camera. See
1.7 Connecting
the Data Cable.
B. Access live view. See
2.1 Installing on a Network.