Panduit FRHC4YL6 Dépliant
w w w. p a n d u i t . c o m
SPECIFICATION SHEET
a p p l i c a t i o n s
Fastest installations
No bolts need to be tightened and no tools are required when installing the QuikLock
™
Coupler; QuikLock
™
Couplers and Brackets take less than five seconds to make a
mechanically secure connection
Easy to maintain
Hinged channel cover installs easily and fully encloses the channel for cable protection;
split hinged channel cover creates radiused 3/4" (19mm) opening for easy access to
add or remove cables; the 6x4 hinged and split hinged channel covers will stay open
between 30° and 90° to allow cable access even in height restricted areas
Split fitting covers allow cable to be laid in without removing the fitting cover; the covers
are also designed to prevent cables from coming out of the channel as cable is
pulled through
Hinged channel covers and split fitting covers protect cabling and provide fast and
easy access for future cabling moves, adds, and changes
split hinged channel cover creates radiused 3/4" (19mm) opening for easy access to
add or remove cables; the 6x4 hinged and split hinged channel covers will stay open
between 30° and 90° to allow cable access even in height restricted areas
Split fitting covers allow cable to be laid in without removing the fitting cover; the covers
are also designed to prevent cables from coming out of the channel as cable is
pulled through
Hinged channel covers and split fitting covers protect cabling and provide fast and
easy access for future cabling moves, adds, and changes
System strength
Robust system of channel, covers, fittings and other non-metallic system components,
protect cable from physical damage; system includes full range of directional and
spillout fittings
protect cable from physical damage; system includes full range of directional and
spillout fittings
Versatility
Multiple spillout options include spill-over fittings and the vertical tee which accepts a
three sided trumpet, transition to corrugated tubing and Panduit
three sided trumpet, transition to corrugated tubing and Panduit
®
FiberRunner
®
and
Fiber-Duct
™
Systems
Cable protection
Minimum 2" bend radius maintained throughout all fittings prevents excessive bends in
fiber optic cabling
fiber optic cabling
k e y f e a t u r e s a n d b e n e f i t s
Open channel
Cable
No. of Cables
50% fill capacity:
1.6mm
3819
(4" pile up)
2.0mm 2444
3.0mm 1086
3.0mm 1086
Fiber Optic
Ribbon Interconnect
Ribbon Interconnect
5.20mm
361
Category 6
6.35mm
242
Category 6A
7.57mm
171
Material:
Rigid PVC (Channel), ABS (Fittings)
Flammability:
94V-0
Approvals:
UL Listed to 2024A Optical Fiber Cable Routing Assemblies
Compliant with the applicable tests in Telcordia GR-63-CORE
Network Equipment Building Systems Level 3
Compliant with the applicable tests in Telcordia GR-63-CORE
Network Equipment Building Systems Level 3
CSI spec form:
LP-CSISPEC-FR
t e c h n i c a l i n f o r m a t i o n
The 6x4 routing system shall be a system of channel, fittings, and
brackets designed to segregate, route, and protect fiber optic and
high performance copper cabling. Channel and fittings shall be
assembled using pre-assembled couplers. A selection of spillout
options shall be available that easily attach using the vertical tee.
Fittings maintain a minimum 2" bend radius to protect against
signal loss due to excessive cable bends. Available system colors
shall be yellow, orange, and black. A full complement of brackets
shall be available for attaching system components to ladder rack,
threaded rod, auxiliary framing, strut, equipment racks, cabinets
and raised floor pedestals.
brackets designed to segregate, route, and protect fiber optic and
high performance copper cabling. Channel and fittings shall be
assembled using pre-assembled couplers. A selection of spillout
options shall be available that easily attach using the vertical tee.
Fittings maintain a minimum 2" bend radius to protect against
signal loss due to excessive cable bends. Available system colors
shall be yellow, orange, and black. A full complement of brackets
shall be available for attaching system components to ladder rack,
threaded rod, auxiliary framing, strut, equipment racks, cabinets
and raised floor pedestals.
s p e c i f i c a t i o n s
The FiberRunner
®
6x4 Routing System is a system of
channel, fittings and brackets designed to segregate,
route, and protect fiber optic and high performance
copper cabling. It is suited for data center applications
where cable is routed from distribution areas to
equipment cabinets or racks. It is used in Telco Central
Offices to route fiber optic jumper cables between fiber
distribution frames and equipment bays. It can be
deployed over the racks or in approved underfloor
applications. Channel and fittings are assembled using
timesaving Panduit
route, and protect fiber optic and high performance
copper cabling. It is suited for data center applications
where cable is routed from distribution areas to
equipment cabinets or racks. It is used in Telco Central
Offices to route fiber optic jumper cables between fiber
distribution frames and equipment bays. It can be
deployed over the racks or in approved underfloor
applications. Channel and fittings are assembled using
timesaving Panduit
®
QuikLock
™
Couplers. A selection of
spillout options is available that easily attach using the
vertical tee. Fittings maintain a 2" bend radius to protect
against signal loss due to excessive cable bends. Available
system colors are yellow, orange, and black to
differentiate various types of cabling. A full complement
of QuikLock
against signal loss due to excessive cable bends. Available
system colors are yellow, orange, and black to
differentiate various types of cabling. A full complement
of QuikLock
™
Brackets is available to attach system
components to support structures found in
all applications.
The FiberRunner
all applications.
The FiberRunner
®
6x4 Routing System is part of the
Panduit complete fiber distribution system, which
includes the FiberRunner
includes the FiberRunner
®
24X4,12x4, 4x4, and 2x2
Routing Systems, the Fiber-Duct
™
4x4 and 2x2 Routing
Systems, Wyr-Grid
™
Overhead Cable Tray System, cable
management, and racks.
FiberRunner
®
6x4 Routing System
4.44
(112.8mm)
6.58
(167.3mm)
A = 23.6 in.
2
(15354mm
2
)
Dimensions are in inches
(Dimensions in parentheses
are metric).
(Dimensions in parentheses
are metric).
Channel and Cover
6x4 channel (6'):
FR6X4**6
6x4 hinged cover (6'):
FRHC6**6
6x4 split hinged cover (6'):
FRSHC6**6
Cable retainer:
FRCR6BL-X
Fittings, Split Covers, and Spillouts
QuikLock
™
Coupler:
FRBC6X4**
Horizontal right angle:
FRRA6X4**
Horizontal right angle cover:
FRRASC6**
Horizontal 45°:
FRH456X4**
Horizontal 45° cover:
FRH45SC6**
Horizontal tee:
FRT6X4**
Horizontal tee cover:
FRTSC6**
4-way cross:
FRFWC6X4**
4-way cross cover:
FRFWCSC6**
End cap:
FREC6X4**
Inside Vertical 90°
FRIVRA6X4**
Inside vertical 45°:
FRIV456X4**
Outside vertical 45°:
FROV456X4**
Outside vertical 45° cover:
FROV45SC6**
Outside vertical 90°:
FROVRA6X4**
Outside vertical 90° cover:
FROVRASC6**
6x4 to 4x4 FiberRunner
®
Reducer fitting:
FRRF6FR4**
6x4 to 4x4 FiberRunner
®
Reducer Fitting cover:
FRRF6FR4SC**
6
X
4 FiberRunner
®
System to
4x4 Fiber-Duct
™
Reducer Fitting:
FRRF64**
Adapter to ADC 6x4 FiberGuide
1
:
FRADC6X4**
Adapter to Tyton 8x4 Lightguide
2
:
FRTYT68
Adapter to Warren &
Brown 8x4 Lightpaths
Brown 8x4 Lightpaths
3
:
FRWBS68
QuikLock
™
vertical tee:
FRVT6X4**
3-sided vertical tee trumpet spillout:
FTR4X4**
2-port spillout to 1.5" I.D.
corrugated tubing:
corrugated tubing:
FIDT4X4BL
4x4 hinged duct vertical
cable manager kit:
cable manager kit:
FRHD4KT**
4x4 hinged duct bend
radius control trumpet:
radius control trumpet:
TRC4HDBL
Low profile reducer 4x4 to
2x2 for vertical tee:
2x2 for vertical tee:
FRLPR42BL
Spill-over with 2x2 exit:
FRSPJ2X2**
Spill-over cover with
2x2 exit for 6x4 system:
2x2 exit for 6x4 system:
FRSPJC26**
2x2 three-sided trumpet:
FTR2X2**
1-port spillout to 1.5" I.D.
corrugated tubing:
corrugated tubing:
FIDT2X2**
2x2 hinged duct vertical
cable manager kit:
cable manager kit:
FRHD2KT**
2x2 FiberRunner
®
Bend
Radius Control Trumpet:
TRC2HDBL
Spill-over with 4x4 exit:
FRSPJ4X4**
Spill-over cover with
4x4 exit for 6x4 system:
4x4 exit for 6x4 system:
FRSPJC46**
Dual downspout:
FRDDS6X4**
Dual downspout cover:
FRDDSHC6**
4x4 3-sided trumpet:
FRTR4X4**
2-port spillout to 1.5" I.D.
corrugated tubing:
corrugated tubing:
FRIDT4X4**
1-port spillout to 1.5" I.D.
corrugated tubing:
corrugated tubing:
FR1.5IDE**
3-sided BRC trumpet
spillout for 6x4 exit:
spillout for 6x4 exit:
FRTR6X4**
6x4 up spout:
FRUPS6X4**
Innerduct transition fitting:
FITF6X4
Corrugated tubing spillout:
FRIDT6X4**
QuikLock
™
Mounting Brackets
QL existing 1/2" thr rod brkt:
FR6TRBE12
QL existing 5/8" thr rod brkt:
FR6TRBE58
QL new 1/2" thr rod brkt:
FR6TRBN12
QL new 5/8" thr rod brkt:
FR6TRBN58
QL under floor brkt:
FR6USB
QL adjust ladder rack brkt:
FR6ALB
QL center support brkt 1/2":
FR6CS12
QL center support brkt 5/8":
FR6CS58
QL adjust C-brkt 1/2":
FR6ACB12
QL adjust C-brkt 5/8":
FR6ACB58
QL trapeze 3/8" brkt:
FR6TB38
QL trapeze 1/2" brkt:
FR6TB12
Two-piece ladder rack brkt 1/2" thr rod: F2PCLB12
Two-piece ladder rack brkt 5/8" thr rod: F2PCLB58
QL ladder rack brkt:
Two-piece ladder rack brkt 5/8" thr rod: F2PCLB58
QL ladder rack brkt:
FR6LRB
QL “L” wall mount brkt:
FR6LB
QL NetFrame
™
Rack Mount Brkt:
FRRMBNF58
QL adjust cabinet mount brkt:
FR6ACAB
Two-piece framing clip 5/8"
thr rod to 9/16" C-channel
aux. framing bars:
thr rod to 9/16" C-channel
aux. framing bars:
FRAFC58
4 post rack brkt:
FR4PRB58
1
FiberGuide is a registered trademark of ADC
Telecommunications, Inc.
2
Lightguide Fiber Optic Protection System is a product of the
Hellerman Tyton Corporation.
3
Lightpaths is a trademark of Warren & Brown Technologies
Pty Ltd.
**Substitute: YL = Yellow, OR = Orange, BL = Black
**Substitute: YL = Yellow, OR = Orange, BL = Black