Brodit ProClip 804782 804782 Dépliant
Codici prodotto
804782
1.
2.
INSTALLATION INSTRUCTIONS
4.
3.
Please read all of the instructions and look at the pictures before attaching the ProClip.
1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Peel off the cover of
adhesive tape on the ProClip. Pull/flip the rubber sealant open on the A-Post. Insert the angled edge on the lower
part of the ProClip into the gap and hook it behind the A-post panel edge.
2. Press firmly forward on the upper part of the ProClip so the angled edge hooks around the A-post panel edge
by the windshield.
3 and 4. The ProClip is in place.
1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Peel off the cover of
adhesive tape on the ProClip. Pull/flip the rubber sealant open on the A-Post. Insert the angled edge on the lower
part of the ProClip into the gap and hook it behind the A-post panel edge.
2. Press firmly forward on the upper part of the ProClip so the angled edge hooks around the A-post panel edge
by the windshield.
3 and 4. The ProClip is in place.
2 (2)