Brodit ProClip 834862 834862 Dépliant
Codici prodotto
834862
1.
2.
INSTALLATION INSTRUCTIONS
4.
3.
Please read all of the instructions and look at the pictures before attaching the ProClip.
1. Press the thin end of the enclosed gap openers into the gap between the center console panel frame and the
console edge, to widen it. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed.
Peel off the cover of adhesive tape on the ProClip.
2. Align the front part of the ProClip as shown in the picture. Press the angled edge on the right part of the
ProClip into the gap between the gap openers.
3. Press firmly down on the left part of the ProClip so the angled edge hooks around the console sidewall edge by
the floor carpet. Press until you see or hear/feel it snaps into place. Pull out the gap openers.
4. The ProClip is in place.
1. Press the thin end of the enclosed gap openers into the gap between the center console panel frame and the
console edge, to widen it. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed.
Peel off the cover of adhesive tape on the ProClip.
2. Align the front part of the ProClip as shown in the picture. Press the angled edge on the right part of the
ProClip into the gap between the gap openers.
3. Press firmly down on the left part of the ProClip so the angled edge hooks around the console sidewall edge by
the floor carpet. Press until you see or hear/feel it snaps into place. Pull out the gap openers.
4. The ProClip is in place.
2 (2)