Brodit ProClip 654836 654836 Dépliant
Codici prodotto
654836
1.
2.
INSTALLATION INSTRUCTIONS
4.
3.
Please read all of the instructions and look at the pictures before attaching the ProClip.
1. Press the thin end of the enclosed gap opener into the gap between the console sidewall and the panel
surrounding the power outlet, to widen the gap. Use the enclosed alcohol pad to clean the area where the ProClip
is to be installed. Peel off the adhesive tape cover on the ProClip. Hook the angled edge on the right side of the
ProClip around the console edge.
2. Slide the ProClip upward until it stops.
3. Place your index fingers behind the upper and lower edge on the right side of the ProClip and pull towards you,
and then push/hook the left angled edge around the console edge. Pull out the gap opener.
4. The ProClip is in place.
1. Press the thin end of the enclosed gap opener into the gap between the console sidewall and the panel
surrounding the power outlet, to widen the gap. Use the enclosed alcohol pad to clean the area where the ProClip
is to be installed. Peel off the adhesive tape cover on the ProClip. Hook the angled edge on the right side of the
ProClip around the console edge.
2. Slide the ProClip upward until it stops.
3. Place your index fingers behind the upper and lower edge on the right side of the ProClip and pull towards you,
and then push/hook the left angled edge around the console edge. Pull out the gap opener.
4. The ProClip is in place.
2 (2)