Kramer Electronics SID-DP Dépliant
SID-DP
DisplayPort over Twisted Pair Transmitter & Step
−
In Module
The SID
−
DP is a DGKat™ twisted pair
transmitter and step
−
in commander for
DisplayPort and unbalanced stereo audio
signals. The unit includes a “Step
signals. The unit includes a “Step
−
In” button
that allows the local source to be routed as
the active source on the main display
through the main switcher.
the active source on the main display
through the main switcher.
HDTV Compatible.
HDCP Compliant.
Control
- Step
−
in button and contact closure.
DGKat™ Signal Integration
- Kramer’s unique technology for converting TMDS as well as control and communication
to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat™ cables designed
specifically for optimum performance.
specifically for optimum performance.
Cable
- Requires STP (shielded twisted pair) cable. For optimum range and performance, use Kramer's
BC
−
DGKat623 or BC
−
DGKat7a23 cables. Note that the transmission range depends on the signal resolution,
graphics card and display used. The distance using non
−
Kramer CAT 6 and CAT 7 cables may not reach these
ranges. Use only shielded cable where both ends of the shield are soldered to ground.
Compatible Switcher
- VP
−
81SIDN.
Power Connect™ System
- A single connection to the VP
−
81SIDN Switcher can power the unit.
Compact DigiTOOLS®
- 3 units can be rack mounted side
−
by
−
side in a 1U rack space with the optional RK
−
3T rack
adapter.
FEATURES