Philips BTB2315 BTB2315/12 Manuale Utente
Codici prodotto
BTB2315/12
8
EN
Demonstrate the features
In standby mode, press to demonstrate
features of this device.
»
The features are displayed one by one
across the display panel.
• To turn off the demonstration, press
again.
Prepare the remote control
Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
•
Risk of decreased battery life! Never mix different
brands or types of batteries.
•
Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
To insert the remote control battery:
1
Open the battery compartment.
2
Insert the supplied AAA battery with
correct polarity (+/-) as indicated.
3
Close the battery compartment.
Set clock
1
In standby mode, press and hold CLOCK
on the remote control for more than two
seconds.
»
[24 HOUR] or [12 HOUR] hour
format is displayed.
2
Press / to select [24 HOUR] or
[12 HOUR] hour format.
3
press CLOCK to confirm.
»
The hour digits are displayed and begin
to blink.
4
Press / to select hour and press
CLOCK to confirm.
»
The minute digits are displayed and
begin to blink.
5
Press / to select minute and press
CLOCK to confirm.
»
[SYNC ON] is displayed on the LCD
screen.
6
Press / to select whether to
synchronize the system clock with an RDS
radio station that transmits time signals,
and then press CLOCK to confirm.
Note
•
If no button is pressed in 90 seconds, the system exits
clock setting mode automatically.
Tip
•
You can view clock information in power-on mode by
pressing CLOCK.
Turn on
Press .
»
The unit switches to the last selected
source.