Autodesk Inventor Professional 2008 Swap, Network, English 46206-091462-9399?NLM Manuale Utente

9 

Create and modify pipe routes quickly and easily 

by selecting a start point, an end point, and any 
number of intermediate points to define the route. 

Complete associativity means that pipe routes 
automatically update when the 3D assembly 
changes. Constrained routing gives users precise 
control over the location of piping runs using 3D 
Sketch tools. Rules-based routing enables users 
to automatically adhere to design rules, such 
as minimum or maximum length criteria, while 
creating and modifying pipes.

Make sure flexible hose and fittings fit properly 
using a 3D digital prototype that drives accurate 
manufacturing documentation. The system inserts 
appropriate hose fittings from the Content Center 
and checks for minimum bend radius based on 
the selected hose style. Hose lengths are updated 
automatically for use in length roll-up commands.

In real-world piping designs, users may need 
to bend a pipe rather than insert an elbow. The 
Custom Bend command provides flexibility and 
control even for nonstandard designs. Create 
bends of custom radius and angle with the familiar 
methods used for rigid tubing.

Inventor enables users to reduce the time required 

to design tubing, piping, and flexible hose. 

Tube and Pipe Design

The rules-based routing 

tools in Inventor select  

the appropriate fittings and 

help ensure that  

pipe runs comply with 

design rules for minimum 

and maximum length, 

round-off increments, and 

bend radius.

Make sure the correct fittings and gaskets are used 
when designing pipe runs with flanged fittings. 
Inventor automatically populates the pipe run 
with flanged components, replacing couplers with 
flanged components and the corresponding gaskets.

www.rand.com/imaginit/autodeskinventor