LevelOne IES-1085 IES1085 Dépliant

LevelOne IES-1085 Industry Ethernet Switch provides 4 802.3af PoE ports 

& 4 802.3at PoE ports of 10/100Base-TX plus 2 1000Base SFP slots to 

enable high speed network at mission-critical environment. This device 

is designed to be mounted on an industry standard DIN-rail, plus the 

clearly visible status LEDs provide simple monitoring of port link activity. 

Moreover, the SFP slots support pluggable modules that enabling you to 

choose from a variety of transceivers.

All components are built to withstand harsh environment applications 

without compromise where humidity, temperature variation and even 

shock vibration are concerns, including Electric & Utility, Critical 

Infrastructure, Transportation and Surveillance Security. This device 

operates under -40 to 75 Celsius (-40 to 167 Fahrenheit) temperature.

- Supports PoE Power Sourcing Equipment (PSE)

- PoE control and scheduling

- Supports α-ring and RSTP/MSTP/STP for Ethernet redundancy

- IP Multicast Filtering through IGMP Snooping V1, V2 & V3

- Supports port-based VLAN and IEEE802.1Q VLAN Tagging and GVRP

- IEEE802.1p QoS with four priority queues

- MAC-based trunking with automatic link fail-over

- RS-232 console, Telnet, SNMP V1, V2c & V3, RMON, Web Browser, and    

   TFTP Management

- Supports Command Line Interface in RS-232 Console

- Supports IEEE802.1x Security

- Bandwidth Rate Control

- Per-port programmable MAC address locking

- Up to 24 Static Secure MAC addresses per port

- Port mirroring

- NTP synchronization 

- 1000Mbps-Full-duplex, 10/100Mbps-Full/Half-duplex,  

   Auto-Negotiation, Auto-MDI/MDIX

- Full wire-speed forwarding rate

- -40°C to 75°C (-40°F to 167°F) operating temperature range, tested for 

   functional operation @ -40°C to 85°C (-40°F to 185°F)

Supports Ring topology network providing simple installation and ultra 

fast network recovery performance, less than 15ms. Unlike much 

complex resilient topology, such as a redundant star, the Ring simplifies 

the network design and requires less cabling installation. In addition, 

fast network recovery time helps minimize system downtime.

IES-1085 supports a variety of management features including: CLI via 

Console or Telnet; Graphic User Interface via Web Browser or Simple 

Network Management Protocol via SNMP tools. It provides better 

visibility and management of those critical assets.

This switch is Power Sourcing Equipment (PSE), and it is fully complied 

with IEEE 802.3af & 802.3at PoE standard at maximum 15.4W / 30W 

power budget per port. It helps to save infrastructure wiring costs 

dramatically by eliminating electric wiring and less UPS needed.

This device has been tested under UL508 standard for Industrial Control 

Equipment to endurance under test turn on and off 6,000 times while 

loaded, with no single failure. It’s highly reliability and safety 

measurement to ensure field hardened, especially for the harsh 

environment.

Unit: mm

Side

Buttom

Top

Front

P

o

w

e

r 

1

P

o

w

e

r 

2

P

o

w

e

r 

3

Res

et

+

+

71.4

140

17

0