Intel X3460 BV80605001908AL Manuale Utente
Codici prodotto
BV80605001908AL
Signal Description
52
Datasheet, Volume 1
6.2
Memory Reference and Compensation
6.3
Reset and Miscellaneous Signals
Table 6-4.
Memory Reference and Compensation
Signal Name
Description
Direction
Type
SA_DIMM_VREFDQ
SB_DIMM_VREFDQ
SB_DIMM_VREFDQ
Channel A and B Output DDR3 DIMM DQ Reference Voltage.
O
Analog
SM_RCOMP[2:0]
System Memory Impedance Compensation.
I
Analog
Table 6-5.
Reset and Miscellaneous Signals (Sheet 1 of 2)
Signal Name
Description
Direction
Type
CFG[17:0]
Configuration signals:
The CFG signals have a default value of 1 if not
terminated on the board.
• CFG[1:0]: PCI Express Bifurcation
Intel Xeon
®
processor 3400 series:
11 = 1 x16 PCI Express
10 = 2 x8 PCI Express
01 = 4 x4 PCI Express (requires Intel 3420 or
3400 Chipset)
00 = Reserved
• CFG[2]: Reserved configuration land. A test point
may be placed on the board for this land.
• CFG[3]: Reserved configuration land.
• CFG[6:4]: Reserved configuration lands. A test
• CFG[6:4]: Reserved configuration lands. A test
point may be placed on the board for this land.
• CFG[17:7]: Reserved configuration lands. Intel
does not recommend a test point on the board for
this land.
I
CMOS
COMP0
Impedance compensation must be terminated on the
system board using a precision resistor. Refer to
for the termination requirement.
I
Analog
COMP1
Impedance compensation must be terminated on the
system board using a precision resistor. Refer to
for the termination requirement.
I
Analog
COMP2
Impedance compensation must be terminated on the
system board using a precision resistor. Refer to
for the termination requirement.
I
Analog
COMP3
Impedance compensation must be terminated on the
system board using a precision resistor. Refer to
for the termination requirement.
I
Analog
FC_x
Future Compatibility (FC) signals are signals that are
available for compatibility with other processors. A test
point may be placed on the board for these lands.
PM_EXT_TS#[1:0]
External Thermal Sensor Input: If the system
temperature reaches a dangerously high value, this
signal can be used to trigger the start of system
memory throttling.
I
CMOS
PM_SYNC
Power Management Sync: A sideband signal to
communicate power management status from the
platform to the processor.
I
CMOS