Omnitron iConverter 10/100M2 8901N-1 Manuale Utente
Codici prodotto
8901N-1
manaGement system
The 10/100M2 has integrated management, eliminating the
cost and space required for external management hardware.
The iConverter management system provides comprehensive
remote configuration and performance monitoring. iConverter
management reduces operational expenditures by keeping
truck rolls to a minimum through remote provisioning,
unidirectional fault detection, trap notification and loopback
capabilities.
iConverter management is available out-of-band via IP-Less
iConverter management is available out-of-band via IP-Less
protocol using the 802.3ah OAM channel or Omnitron’s Secure
OAM channel, or in-band using SNMP or Telnet.
Management is accessed via Omnitron’s NetOutlook® SNMP
Management is accessed via Omnitron’s NetOutlook® SNMP
Network Management Software with an intuitive Graphical
User Interface, or third party SNMP software. Telnet and CLI
management interfaces are also supported, and utilize an easy
to use, menu-driven interface. The CLI interface is accessed
via a Serial Console Port, that provides local configuration
and allows for firmware updates. Additionally, the port can be
connected to a serial modem to provide an alternative remote
management path.
IP-Based Management
The 10/100M2 can be managed through IP protocols,
IP-Based Management
The 10/100M2 can be managed through IP protocols,
SNMPv1, SNMPv2c, SNMPv3 and Telnet. The IP address of
the 10/100M2 can be user-defined or resolved through the
DHCP host on the network. The IP protocols for management
access can be enabled or disabled individually or as a
group. Access to the management is protected by password
authentication. SMNPv3 strengthens secure access to devices
by a combination of authenticating and encrypting packets
over the network. Management VLAN can also be defined to
separate management traffic from customer traffic.
802.3ah and Secure OAM Management Channels
When utilizing a Remote OAM management channel (Secure
802.3ah and Secure OAM Management Channels
When utilizing a Remote OAM management channel (Secure
IP-less or 802.3ah), the NID at the Customer Premises is
securely managed by its fiber link partner located at the Central
Office or Point of Presence. The management network IP
address is not available to the customer network and is isolated
by the iConverter Network Management Module (NMM2) in the
19-Module Chassis at the Central Office.
A management processor on the 10/100M2 in the 19-Module
Chassis isolates the encrypted management data from the
customer data and communicates with the NMM2 via a separate
management backplane bus. Management traffic on the user
data lines is IP-less and carried on a securely encrypted data
channel to protect the management from unauthorized access.
The chassis at the Central Office requires only a single IP
address to manage itself and all of the connected remote
chassis managed by the Remote OAM channel. This is the ideal
configuration for networks that separate secure management
traffic from the service (customer) traffic on different networks,
or when management IP addresses are at a premium.
Page 3
speCiFiCatiOns
iConverter
10/100M2
Description
10/100BASE-T UTP to 100BASE-FX
Fiber Media Converter
and Network Interface Device
Protocols
10BASE-T, 100BASE-TX, 100BASE-FX
with 2048 bytes max. frame size
UTP Cable
EIA/TIA 568A/B, Category 5 and higher
Fiber Cables
Multimode: 50/125, 62.5/125, 100/140µm
Single-mode: 9/125µm
Serial Cable
RS-232, 22 to 24 AWG, 12 to 50 pF/ft.
UTP Connector
RJ-45
Fiber Connectors
SFP:
Dual Fiber:
Single-Fiber:
LC
SC, ST, LC, MT-RJ
SC
Serial Connector
Mini DIN-6 female,
mini DIN-6 male to DB-9 female adapter included
Controls
DIP-Switches and LEDs
DC Power
Plug-In Module: 0.9A @ 3.3VDC
Standalone: 8-15VDC,
0.5A @ 9VDC
DC Power Connector
Plug-In: Power supplied by backplane
Standalone: 2.5mm Barrel Connector or
Field-wireable Terminal Connector
AC Power Adapter
[US]
Plug-In Module: N/A
Standalone: 100-120VAC/60Hz
0.06A @ 120VAC
AC Power Adapter
[Universal]
Plug-In Module: N/A
Standalone: 100-240VAC/50-60Hz
0.06A @ 120VAC
Dimensions
Plug-In Module: W:0.85" x D:4.5" x H:2.8"
Standalone: W:3.1" x D:4.8" x H:1.0"
Wallmount: W:3.8" x D:4.8" x H:1.0"
Weight
without power adapter
Plug-In Module: 8oz.
Standalone: 1 lb.
Weight
with power adapter
Plug-In Module: N/A
Standalone: 1.5 lb.
Compliance
UL, CE, FCC Class A, MEF 9, MEF 14
IP-Based Management
Telnet; SNMPv1, SNMPv2c, SNMPv3
Temperature
Standard Operating: 0 to 50º C
Wide Operating: -40 to 60º C
Extended Operating: -40 to 75º C
Storage: -40 to 80º C
Humidity
5% to 95% (non-condensing)
Altitude
-100m to 4000m (Operational)
MTBF (Hours)
Plug-In Module: 550,000
Standalone without Power Adapter: 550,000
Standalone With Power Adapter: 250,000