Adaptec 6805Q 2270700-R Manuale Utente

Appendix C: Using the Adaptec RAID Configuration Utility

●

110

2

Select Manage MaxCache Pool from the ACU main menu. 

All supported SSDs are displayed.

Note: 

Uninitialized SSDs may not appear in the list; see 

 for more information 

about initializing drives.

3

Using the arrow keys, select a SSD from the list. 

4

Press Ins to add the SSD to the maxCache pool.

5

To remove a SSD from the pool, press the right arrow to switch windows, use the arrow 
keys to select a SSD, then press Del. 

6

Press Enter to save your changes and return to the main menu.

Using SerialSelect to Modify Controller Settings

The SerialSelect utility is a tool for modifying the settings of your controller and the disk drives 
connected to it. 

Opening SerialSelect

To open SerialSelect, start the ARC utility (see 

), select SerialSelect, then press Enter.

Follow the on-screen instructions to modify the settings of your controller and connected disk 
drives as required.

Applying Changes and Exiting

1

To exit SerialSelect, press Esc until you are prompted to exit. 

If you modified any settings, you are prompted to save the changes before you exit. 

2

Select Yes to exit, then press any key to restart your computer.

Any changes you made take effect after the computer restarts.

Modifying Your Controller’s Configuration

Note: 

Default controller settings are suitable for most computers. We recommend that you do 

not change the default setting.

To modify your controller’s basic settings, select Controller Configuration from the main 
SerialSelect menu.

To modify your controller’s power management settings, select Advanced Configuration. 

To modify your controller’s PHY settings, select PHY Configuration.

Some options may not be available for your controller.