Adaptec 6805Q 2270700-R Manuale Utente
Codici prodotto
2270700-R
Chapter 5: Installing the Controller and Disk Drives
●
50
Connecting Disk Drives to Your Controllers
You can connect SAS disk drives, SATA disk drives, and SATA and SAS Solid State Drives
(SSDs) to your Adaptec RAID controller. (See
(SSDs) to your Adaptec RAID controller. (See
www.adaptec.com/compatibility
for a list of
compatible drives.) There are no jumpers or switches to set before installation.
If you plan to build a bootable array, ensure you install at least the minimum number disk
drives required to support the RAID level you want. See
drives required to support the RAID level you want. See
for more information.
Note:
Although you can connect both SAS and SATA disk drives to your SAS controller, we
recommend that you not combine SAS and SATA disk drives within the same array or logical
drive. See
drive. See
for more information.
You have two connection options:
●
To connect directly to the controller, see the following section.
●
To connect to a backplane, see
.
To connect Solid State Drives to your controller, see
.
Connecting Drives Directly to the Controller
In a direct-attach connection, SAS or SATA disk drives are connected directly to a SAS card
with SAS cables. The number of direct-attached disk drives is limited to four per internal SAS
connector. (For more information about direct-attach connections, see
with SAS cables. The number of direct-attached disk drives is limited to four per internal SAS
connector. (For more information about direct-attach connections, see
.)
1
Install your internal SAS or SATA disk drives, following the instructions in your system’s
documentation.
documentation.
2
Use internal SAS or mini-SAS cables to attach the disk drives to the controller, as shown in
the following example.
the following example.
Note:
SAS fan-out cables are also available with an additional sideband (SFF-8448) cable
that caries SGPIO signals for enclosure management. This additional sideband cable is not
used with direct-attached disk drives.
used with direct-attached disk drives.
SAS/SATA
disk drives
disk drives
Single-port connector
internal x4 mini-SAS connectors
mini-SAS to SATA fan-out cable