Adaptec 6805Q 2270700-R Manuale Utente

Chapter 6: Creating a Bootable Array

●

56

4

Select Initialize Drives, then press Enter. 

5

Select at least three disk drives for the array, press Insert for each selected disk drive, then 
press Enter.

Caution: 

During initialization, all data is deleted from the disk. Before continuing, 

back up any data you want to keep.

6

Press Y, then press Enter. 

The selected disk drives are initialized, then the ACU screen appears.

7

Select Create Array, then press Enter.

8

Select the disk drives that were just initialized, press Insert for each selected disk drive, 
then press Enter.

9

When the Array Properties screen opens, follow the instructions in the following table. 

10

When a cache warning message displays, type Y.

11

Once the array is created, a message displays telling you that the array can now be used. 
Press any key to return to the ACU Menu.

You can start using the array immediately. However, performance is reduced until the 
build process is complete.

12

Press Esc until the Exit utility window appears. 

13

Select Yes, then press Enter. 

The computer restarts. 

14

Continue with 

. 

Property Line

Entry or Selection

Array Type

Select RAID 5, then press Enter.

Array Label

Type a name, then press Enter.

Array Size

Press Enter, then press Enter again to use the default granularity of GB.

Stripe Size

Press Enter to use the default (256 KB).

Read Caching

Press Enter to use the default (Yes).

Write Caching

Press Enter to use the default (Enable always).

Create RAID via

Press Enter to use the default (Build/Verify).

MaxCache Read

Press Enter to use the default (Enable Read)

[Done]

Press Enter.