Intel SR1640TH SR1640THNA Manuale Utente
Codici prodotto
SR1640THNA
Front Panel Control and Indicators
Intel® Server System SR1640TH TPS
Revision 1.0
79
Intel order number: E94847-001
Color
State
Criticality
Description
3. PCI Express* correctable link errors.
Integrated BMC detected
1. Redundancy loss such as a power supply or fan. Applies only if
Integrated BMC detected
1. Redundancy loss such as a power supply or fan. Applies only if
the associated platform subsystem has redundancy capabilities.
2. CPU disabled – if there are two CPUs and one CPU is disabled.
3. Fan alarm – Fan failure. Number of operational fans should be
3. Fan alarm – Fan failure. Number of operational fans should be
more than minimum number needed to cool the system.
4. Non-critical threshold crossed – Temperature, voltage, power
nozzle, power gauge, and PROCHOT2 (Therm Ctrl) sensors.
5. Battery
failure.
6. Predictive failure when the system has redundant power
supplies.
Amber
Blink
Non-critical
Non-fatal alarm – system is likely to fail
BIOS Detected
1. In non-mirroring mode, if the threshold of ten correctable errors
BIOS Detected
1. In non-mirroring mode, if the threshold of ten correctable errors
is crossed within the window.
1
2. PCI Express* uncorrectable link errors.
Integrated BMC Detected
1. Critical threshold crossed – Voltage, temperature, power nozzle,
Integrated BMC Detected
1. Critical threshold crossed – Voltage, temperature, power nozzle,
power gauge, and PROCHOT (Therm Ctrl) sensors.
2. VRD Hot asserted.
3. Minimum number of fans to cool the system are not present or
3. Minimum number of fans to cool the system are not present or
have failed.
Amber
Solid on
Critical, non-
recoverable
recoverable
Fatal alarm – system has failed or shutdown
BIOS Detected
1. DIMM failure when there is one DIMM present and no good
BIOS Detected
1. DIMM failure when there is one DIMM present and no good
memory is present.
1
2. Run-time memory uncorrectable error in non-redundant mode.
1
3. CPU configuration error (for instance, processor stepping
mismatch).
Integrated BMC Detected
1. CPU CATERR signal asserted.
2. CPU 1 is missing.
3. CPU
1. CPU CATERR signal asserted.
2. CPU 1 is missing.
3. CPU
THERMTRIP.
4. No power good – power fault.
Power Unit Redundancy sensor – Insufficient resources
offset (indicates not enough power supplies are present).
Notes:
1. The BIOS detects these conditions and sends a Set Fault Indication command to the Integrated BMC to
provide the contribution to the system status LED
provide the contribution to the system status LED
2. Blink rate is ~ 1Hz at 50% duty cycle.
6.2.2.1
System Status LED – BMC Initialization
When AC power is first applied to the system and 5V-STBY is present, the BMC controller
on the server board requires 15-20 seconds to initialize. During this time, the system status
LED will be solid on, both amber and green. Once BMC initialization has completed, the
status LED will stay green solid on. If power button is pressed before BMC initialization
completes, the system will not boot to POST.
on the server board requires 15-20 seconds to initialize. During this time, the system status
LED will be solid on, both amber and green. Once BMC initialization has completed, the
status LED will stay green solid on. If power button is pressed before BMC initialization
completes, the system will not boot to POST.
6.2.3
System Identification LED
The system ID LED provides a visual indication of a system being serviced. The state of the
system ID LED is affected by the following:
system ID LED is affected by the following:
Toggled by the system ID button