PC CHIPS A45G Manuale Utente
26
Motherboard User’s Guide
Init Display First
Use this item to select which graphics controller to use as the primary boot devices.
PCI / PnP Setup Page
This page sets up some parameters for devices installed on the PCI bus and those
utilizing the system plug and play capability.
utilizing the system plug and play capability.
PC Health Status Page
On motherboards support hardware monitoring, this item lets you monitor the param-
eters for critical voltages, temperatures and fan speeds.
eters for critical voltages, temperatures and fan speeds.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
PCI / PnP Setup
Options
PCI-E
PCI
OnBoard
PCI
OnBoard
F10: Save ESC: Exit
+/-/: Value
Enter : Select
F9: Load Default Settings
F1:General Help
: Move
mnlk
Init Display First
PCI
Allocate IRQ to PCI VGA
Yes
Help Item
Allocate IRQ to PCI VGA (Yes)
If this item is enabled, an IRQ will be assigned to the PCI VGA graphics system. You set
this value to No to free up an IRQ.
this value to No to free up an IRQ.
-=- System Hardware Monitor-=-
Smart Fan Function
Press Enter
Shutdown Temperature
Disabled
CPU Temperature
: 44°C/111 ° F
CPU Fan Speed
: 2008 RPM
UCore
: 1.320V
VDIMM
: 1.786V
Case Open Warning Disabled
Chasis Opened No
Chasis Opened No
Help Item
CMOS Setup Utility - Copyright (C) 1985-2007, American Megatrends, Inc.
PC Health Status
f
mnlk
F10: Save ESC: Exit
+/-/: Value
Enter : Select
: Move
F9:Optimized Default
F1:General Help