IMC Networks IMCV-VDSL-LANextender/CO Module 851-14101 Dépliant

VDSL Ethernet LAN Extenders enable LAN and campus network managers and serv-
ice providers to use an existing phone-grade wiring plant to extend 10 Mbps and 100
Mbps Ethernet twisted pair interfaces by using Ethernet over VDSL; the 100m dis-
tance limitation of twisted pair data cabling is no longer a challenge.   

Designed with VDSL (Very high-bit-rate Digital Subscriber Line) technology, the 
iMcV-VDSL-LANextender allows the transmission of data over sub-standard CAT3
and other telephone cabling to achieve substantially longer distances (up to 2 km).  

• One VDSL port with an RJ-11 connector 
• One 10/100 twisted pair Ethernet port with a RJ-45 connector

1

• Auto MDI-II/MDI-X, Auto-Negotiation and Selective Advertising with 

Flow Control on the 10/100 port.

As a media and protocol converter, iMcV-VDSL-LANextender includes the ability to
transfer data both symmetrically, and asymmetrically, allowing distances of up to 2
Km (see chart on reverse side).  Bandwidth can also be configured to ensure users are
limited to a specified amount rather than having access to the maximum achievable
bandwidth. 

Always deploy iMcV-VDSL-LANextender modular media converters in pairs, installing
one module at the central office (CO) and another module at the customer premis-
es (CPE). 

• Directly via unit’s own SNMP (iView²)*;

requires installation in managed chassis

• Via hardware DIP switches
• Remotely with the CO unit’s SNMP (iView²); physical access to CPE not required.

Use  iMcV-VDSL-LANextender modules inside a LAN to extend network segments and
pass data over the existing phones lines.  Using media converters with VDSL technology
is often beneficial when connecting two buildings across the street from one another or
even connecting two areas in a large building. 

•

Operates over existing telephone

twisted pair cabling

•

Symmetric/Asymmetric data rates

•

Bandwidth limiting of data rate

•

Up and running in less than 5 minutes

•

Easily adjust settings when user

requirements change

•

Easy upgrades; no user intervention

or visits to remote locations required

•

Monitor and control all connections

•

Displays data rate in use

•

10/100 Ethernet

•

10Base-S

•

Link Fault Propagate feature, SNMP

management and LEDs assist in diag-
nosing problems on your networks

1 

Ethernet port is also availabe with fiber optic interface.  

Call for more information.
* See reverse side for information on iView².