Spypoint Action Cam 31474 S-Tiny WBF 31474 Scheda Tecnica

Settings • Camera

Enables or disables the wireless transmission of photos to the BLACKBOX

TM

 

receiver (TINY-W

BF

) or to the BLACKBOX

TM

-D controller (TINY-PLUS, TINY-

W

3

).

When the transmission is enabled:

• Only photos are transmitted to the receiver and to the controller, not  

 videos.

• The quality of the photos recorded on the receiver and the controller is  

  reduced to maximize transmission:
 

8 or 10MP = 800 x 600 pixels

 

5MP = 640 x 480 pixels

 

3MP = 320 x 240 pixels

• When the TIME LAPSE mode is enabled, the photos are sent to the  

  receiver and to the controller except for the "30s" setting.

• When the delay setting "10s" is selected, the time between each  

  detection is calculated when the transmission is completed. For 

 

  example, if the transmission takes two seconds, the time between the  

  two detections is 12 seconds.

Note: When the "Wireless" option is activated, it is only possible to take up 

to 2 consecutive shots 

(TINY-PLUS, TINY-W

3

)

.

Allows the user to choose the time interval between each detection before 

the camera records the next photo or video. A longer delay minimize the 

number of photos taken and maximize the battery life. A shorter delay 

maximize the number of photos taken but requires more battery power. 

The shorter times interval are recommended when the cameras is used 

for security purposes.

Additional setting: 

It  is  possible  to  decrease  the  delay  between  detections  to  10  seconds 

(instead of 1 minute) by using the following procedure.

 

Note that the battery life will be affected.

1. Turn OFF the camera. 

2. Press and hold the  button and turn ON the camera. 

3. "10sec enabled" appears on the screen meaning the minimum delay is  

  now 10 seconds. If this option is used, the 30 minute delay disappears. 

4. To reset the camera to 1 minute delay, follow the same procedure.  

  "10sec disabled" appears on the screen. (see next figure)

Takes up to 6 consecutive shots at each detection, with a 10-second delay 

between each photo. This option allows the user to get up to 6 photos 

from different angles when the camera is in PHOTO mode.

Allows the user to select the duration of the recording when the camera 

is set in VIDEO mode.

Allows the user to select a language for the camera menus.

Allows the user to choose the detection sensitivity of the camera. A higher 

sensitivity allows the user to take more photos. 

The camera will only detect sources of heat in movement. Make sure to 

have the least possible objects in front of the camera during the positio-

ning. This prevents the camera to take photos when oriented towards the 

sun while an object moves in front of the camera (e.g. a branch).

10 s delay

1 min delay