Doerr Foto Dörr Foto Action Cam 204475 204475 Scheda Tecnica

PIR sensitivity: choose the sensitivity (high, normal, low, off) or turn sensor off ( ◀ , ▶ , ok)

PIR Interval: Select time (5 sec to 60 min) when PIR sensor is deactivated after a shot

Time Interval: Set time interval of camera. Shoots photos during time set (5sec to 8h) If set “off” the camera triggers upon motion

Timer: Camera is on standby mode during desired time. Outside this time camera does not take photos and does not react to motion 

(same for “timer interval” mode ). After setting time camera only works during time frame.

Date & Time: Date to be set as dd.mm.yyyy, Time to be set in 24 h

Time Stamp: Choose if time & date are shown on pictures or not

Password: Secure camera with password, to avoid misuse. The password is needed every time the camera is switched “on”. 

Default password is “0000”. Note your password carefully, without the password the camera cannot be operated.

Language: Choose either German or English language

Sound / Beep: Choose “beep” sound on keyboard input or “silent” mode

Overwrite function: Camera may overwrite old pictures with new ones when SD card is full or alternatively abandon function

Format: This function deletes all data on the SD card

 

Default settings: This sets all parameters to “factory defaults” except date & time

Press “ok” in setup mode to watch latest photos. Press ▼ and ▲ to display all pictures. Press “ok” again to return to setup screen. Videos cannot be 

displayed but their data with the first “picture”. Single pictures and videos can be deleted by pressing “menu” in playback mode and confirm with 

“ok”.

File name: Pictures and videos will be named continuously, starting with IMG0001.jpg (picture) or IMAG0001.avi (video)

Test shot: In setup mode press then “ok” to manually take a test shot

Fix camera to a tree, pole or any suitable object. Best range is 3-10 meters from camera to object. For security reasons you may obtain cable lock 

optionally.

1) Hang up camera in about 0,75 -  1 m height, slightly tilting ahead
2) Switch camera to “setup” and close housing. 
3) Move in front of camera. When red light is flashing you see the area which is covered by the PIR sensor
4) It is recommended to test the position and take several test photos, to see the area covered by the camera
5) Switch the camera off now

Switch camera to “ON”, after 15-30 seconds camera is ready

Model UV555
User Manual