NEC MultiSync® LCD2070NX LCD2070NX Manuale Utente

Codici prodotto
LCD2070NX
Pagina di 19
English-12
Specifications for MultiSync LCD2070VX
Monitor Specifications
MultiSync LCD2070VX Monitor
Notes
LCD Module
Diagonal:
51 cm/20.1 inches
Active matrix; thin film transistor (TFT)
Viewable Image Size:
51 cm/20.1 inches
liquid crystal display (LCD); 0.255 mm dot
Native Resolution (Pixel Count):
1600 x 1200
pitch; 300 cd/m
*
3
 white luminance;
800:1 contrast ratio, typical.
Input Signal
Video:
ANALOG 0.7 Vp-p/75 Ohms
Digital Input: DVI-D
Sync:
Separate sync.TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. Positive/Negative
Sync on Green (Video 0.7 Vp-p and Sync. 0.3 Vp-p)*
2
Display Colours
16,777,216
Depends on display card used.
Viewing Angle
Left/Right:
80°/80° (CR > 10)
Up/Down:
80°/80° (CR > 10)
Synchronization Range
Horizontal:
31.5 kHz to 83.0 kHz
Automatically
Vertical:
56.0 Hz to 75.0 Hz
Automatically
Resolutions Supported
720 x 400*
1
 : VGA-Text
Some systems may not support all modes
640 x 480*
1
 at 60 Hz to 75 Hz
listed.
800 x 600*
1
 at 56 Hz to 75 Hz
832 x 624*
1
 at 75 Hz
1024 x 768*
1
 at 60 Hz to 75 Hz
1152 x 870*
1
 at 75 Hz
1280 x 1024*
1
 at 60 Hz to 75 Hz
1600 x 1200 at 60 Hz.................................. Recommended resolution is 60 Hz for
optimal display performance.
Active Display Area
Horizontal:
408 mm/16.1 inches
Vertical:
306 mm/12.0 inches
Power Supply
AC 100-240V ~ 50/60Hz
Power Consumption
44 W
(without optional Sound Bar)
Current Rating
1.05 - 0.55 A
Dimensions
442.0 mm (W) x 388.5-498.5 mm (H) x 220.0 mm (D)
17.4 inches (W) x 15.3-19.6 inches (H) x 8.7 inches (D)
Weight
8.6 kg (19.0 lbs)
Environmental Considerations
Operating Temperature:
5°C to 35°C/41°F to 95°F
Humidity:
30% to 80%
Feet:
0 to 15,000 Feet
Storage Temperature:
-10°C to 60°C/14°F to 140°F
Humidity:
10% to 85%
Feet:
0 to 40,000 Feet
*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is
normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on
the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.
*2 If your display is not showing a picture of the SOG and Composite Sync. Signal, please contact our hotline for further assistance.
*3 LCD Module at 25°C.
NOTE:
Technical specifications are subject to change without notice.