Fujifilm Xeon 5050 S26361-F3248-L300 Scheda Tecnica
Codici prodotto
S26361-F3248-L300
Electrical Specifications
18
Dual-Core Intel® Xeon® Processor 5000 Series Datasheet
2.4.2
Phase Lock Loop (PLL) and Filter
V
CCA
and V
CCIOPLL
are power sources required by the PLL clock generators on the Dual-
Core Intel Xeon Processor 5000 series. Since these PLLs are analog in nature, they
require low noise power supplies for minimum jitter. Jitter is detrimental to the system:
it degrades external I/O timings as well as internal core timings (that is, maximum
frequency). To prevent this degradation, these supplies must be low pass filtered from
V
require low noise power supplies for minimum jitter. Jitter is detrimental to the system:
it degrades external I/O timings as well as internal core timings (that is, maximum
frequency). To prevent this degradation, these supplies must be low pass filtered from
V
TT
.
The AC low-pass requirements are as follows:
• < 0.2 dB gain in pass band
• < 0.5 dB attenuation in pass band < 1 Hz
• > 34 dB attenuation from 1 MHz to 66 MHz
• > 28 dB attenuation from 66 MHz to core frequency
• < 0.5 dB attenuation in pass band < 1 Hz
• > 34 dB attenuation from 1 MHz to 66 MHz
• > 28 dB attenuation from 66 MHz to core frequency
The filter requirements are illustrated in
. For recommendations on
implementing the filter, refer to the appropriate platform design guidelines.
Notes:
1.
Diagram not to scale.
2.
No specifications for frequencies beyond f
core
(core frequency).
3.
f
peak
, if existent, should be less than 0.05 MHz.
4.
f
core
represents the maximum core frequency supported by the platform.
Figure 2-1. Phase Lock Loop (PLL) Filter Requirements
CS00141
0 dB
-28 dB
-34 dB
0.2 dB
forbidden
zone
-0.5 dB
forbidden
zone
1 MHz
66 MHz
fcore
fpeak
1 Hz
DC
passband
high frequency
band