Axis Camera Station w/ 10-base license 0202-004 Manuale Utente

3. The AXIS Camera Station Web interface will appear:

Select a camera before clicking the control buttons.

Camera Selection - A list of cameras is displayed for the user, showing cameras according to his/her user rights

Open in new window - Click this button to open a small window showing a live image from the 

selected camera. If the camera has PTZ (Pan/Tilt/Zoom) or audio enabled, the controls are shown 
here.

Open in main window - Click this button to see live images from the selected camera in the main 

window.

Quad view - View live images from four cameras in one window. Select a camera from the camera 

list and then click one of the positioning buttons to position the live image.

Overview - all cameras -Click this button to get a still image from all the cameras in the selected 

camera group. Click on the still images to see live images from the camera.

I/O Controls - Click this button to get the I/O controls. In this view you can see if an I/O port is 

open/closed or if the alarm is on. You can change the I/O port status if it is defined as an output port. 
A live image from the camera connected to the I/O can be activated using the push button with the 
camera number.

Event Log search - This page will show you all logged events sent from the camera to AXIS Camera 
Station. Initially the logged events from the selected camera are shown. Press 

Show all cameras to 

see the log of the entire camera group. If you click on one of the logged events, you will be guided to 
the recorded images showing an overview of all events at the selected date/time.

Find recorded events - From this page you can search through the recorded events. Select date and 
time and click the Search button. You will get an overview of all recorded events. Select one of the 
events and you will see the actual images in the selected event. Date is entered in the format 
yyyy-mm-dd, time in hh:mm.

• OK indicates that the AXIS Camera Station recording server is running. 
• A red exclamation mark (!) indicates that the recording server is not running. 

Click on the icon to refresh the view and update the icons.