Netgear DUALBAND WLAN WNDAP360 N300 AP WNDAP360-PES Manuale Utente

Optionally: To display the MAC Authentication screen for the 802.11a/na modes, click the 
802.11a/na tab. 

Select the Turn Access Control On check box to enable the access control feature.

From the Select Access Control Database drop-down list, select one of the following 
database options:

Local MAC Address Database. The wireless access point uses the local MAC 

address database for access control. This is the default setting.

Remote MAC Address Database. The wireless access point uses the MAC address 
database on an external RADIUS server on the LAN for access control. If you select 
this database, you first need to configure the RADIUS server settings (see 

on page 51).

Click Refresh to refresh the Available Wireless Stations table. The wireless access point 
places the MAC addresses of the attached wireless stations in this table.

Populate the Trusted Wireless Stations table by one of the following methods:

Select MAC addresses from the Available Wireless Stations table:

a.  Select individual check boxes for MAC addresses, or select all MAC addresses by 

selecting the check box in the heading.

b.  Click Move to transfer the MAC addresses from the Available Wireless Stations 

table to the Trusted Wireless Stations table.

Enter MAC addresses manually:

a.  Enter a MAC address directly in the Trusted Wireless Stations table.

b.  Click Add.

To delete a MAC address from the Trusted Wireless Stations table, select individual check 
boxes for MAC addresses, or select all MAC addresses by selecting the check box in the 
heading, and then click Delete.

Click Apply to save your settings.