Lecroy WAVEACE 1012 2-channel oscilloscope, Digital Storage oscilloscope, WaveAce 1012 Manuale Utente
Codici prodotto
WaveAce 1012
WaveAce Remote Control
30
920836 Rev A
ACQUISITION - VOLT_DIV, VDIV
Description
The VOLT_DIV command sets the vertical sensitivity in Volts/div.
The probe attenuation factor is not taken into account for adjusting vertical sensitivity.
The VOLT_DIV? query returns the vertical sensitivity of the specified channel.
Command Syntax
<channel>:Volt_DIV <v_gain>
<channel>:= {C1, C2, C3, C4}
<v_gain>:=
Refer to datasheet specification for your Teledyne LeCroy oscilloscope at
www.teledynelecroy.com.
NOTE: When specifying <v_gain>, the unit V is optional.
Query Syntax
<channel>:Volt_DIV?
Response Format
<channel>:Volt_DIV <v_gain>
Example
The following instruction sets the vertical sensitivity of channel 1 to 50 mV/div:
C1:VDIV 50MV