Lecroy WAVEACE 2022 2-channel oscilloscope, Digital Storage oscilloscope, WaveAce 2022 Manuale Utente
Codici prodotto
WaveAce 2022
Operator's Manual
102
WA1K2K-OM-E RevB
Reference
Using WaveStudio to Remotely Connect to your WaveAce
Oscilloscope
Oscilloscope
The following steps demonstrate how to use WaveStudio to remotely
connect to your WaveAce oscilloscope.
connect to your WaveAce oscilloscope.
1. Make the hardware connection to your oscilloscope.
Connect a network cable to the RJ-45 connector on the back of
your oscilloscope as shown in Back and Side Connections (on page
10).
your oscilloscope as shown in Back and Side Connections (on page
10).
Note
: Contact a system administrator when connecting to any internal
LAN.
2. Configure the remote control settings on the oscilloscope to
enable remote control.
Press the UTILITY Front Panel (on page 10) button to display the
Utility menu, and then press the Next Page option button to
display page 2/4.
Utility menu, and then press the Next Page option button to
display page 2/4.
Now, press the Back USB option button until USBTMC is selected
and your oscilloscope is WaveStudio remote connection ready.
and your oscilloscope is WaveStudio remote connection ready.
3. Download and install the National Instruments Measurement &
Automation Explorer on your PC.