Lecroy WAVEACE 2014 4-channel oscilloscope, Digital Storage oscilloscope, WaveAce 2014 Manuale Utente
Codici prodotto
WaveAce 2014
WaveAce 1000/2000
WA1K2K-OM-E RevB
19
SET TO 50% - Press to stabilize a waveform quickly. The
oscilloscope can set the Trigger Level to be halfway between the
minimum and maximum voltage levels automatically. This is useful
when you connect a signal to the EXT TRIG connector and set the
trigger source to Ext or Ext/5.
oscilloscope can set the Trigger Level to be halfway between the
minimum and maximum voltage levels automatically. This is useful
when you connect a signal to the EXT TRIG connector and set the
trigger source to Ext or Ext/5.
FORCE - Press to complete the current waveform acquisition
whether the oscilloscope detects a trigger or not. This is useful for
SINGLE acquisitions and Normal trigger mode.
whether the oscilloscope detects a trigger or not. This is useful for
SINGLE acquisitions and Normal trigger mode.
LEVEL - Turn to select the trigger threshold level. Press the Level
front panel knob to set the trigger level to zero.
front panel knob to set the trigger level to zero.
See Trigger Types (on page 39) for more information.