Lecroy WaveStation 2052 Function Generator, Frequency Generator WaveStation 2052 Manuale Utente
Codici prodotto
WaveStation 2052
WaveStation
10
WSta-OM-E RevA
CAT I
Installation (Overvoltage) Category rating per EN 61010-1 safety standard
and is applicable for the instrument front panel measuring terminals. CAT
I rated terminals must only be connected to source circuits in which
measures are taken to limit transient voltages to an appropriately low
level.
and is applicable for the instrument front panel measuring terminals. CAT
I rated terminals must only be connected to source circuits in which
measures are taken to limit transient voltages to an appropriately low
level.
Operating Environment
The instrument is intended for indoor use and should be operated in a
clean, dry environment. Before using this product, ensure that its
operating environment is maintained within these parameters:
clean, dry environment. Before using this product, ensure that its
operating environment is maintained within these parameters:
Temperature: 0 °C to 40 °C
Humidity: Maximum relative humidity 80% (non-condensing) for
temperatures up to 30 °C decreasing linearly to 50 % relative humidity at
40 °C.
temperatures up to 30 °C decreasing linearly to 50 % relative humidity at
40 °C.
Altitude: Up to 10,000 ft (3,048 m) at or below 30 °C.
Note: Direct sunlight, radiators, and other heat sources should be taken
into account when assessing the ambient temperature.
into account when assessing the ambient temperature.
WARNING
The instrument must not be operated in explosive, dusty, or wet
atmospheres.
atmospheres.
CAUTION
Do not exceed the maximum specified front panel terminal voltage
levels. Refer to Specifications for more details.
levels. Refer to Specifications for more details.