Saft LS26500HBG, C Size 7700mAh Lithium Battery Cell 3.6V LS26500HBG Scheda Tecnica
Codici prodotto
LS26500HBG
Benefits
l
High voltage response, stable
during most of the lifetime of the
application
application
l
Wide operating temperature
range (- 60°C/+ 85°C)
l
Low self-discharge rate
(less than 1 % after 1 year of
storage at + 20°C)
storage at + 20°C)
l
Easy integration into compact
systems
l
Superior resistance to
atmospheric corrosion
Key features
l
Stainless steel container
and end caps
(low magnetic signature)
(low magnetic signature)
l
Hermetic glass-to-metal sealing
l
Non-flammable electrolyte
l
Underwriters Laboratories (UL)
Component Recognition
l
Compliant with IEC 60086-4
safety standard and
IEC 60079-11 intrinsic safety
standard
IEC 60079-11 intrinsic safety
standard
l
Restricted for transport (Class 9)
Main applications
l
Utility metering
l
Automatic meter readers
l
Buoys
l
Measuring equipment
l
Industrial applications
l
Professional electronics
Optional upon request
l
Low magnetic version
Primary lithium battery
LS 26500
3.6 V Primary lithium-thionyl chloride (Li-SOCl
2
)
High energy density
C-size bobbin cell
C-size bobbin cell
Cell size references
C
May 2010
Electrical characteristics
(typical values relative to cells stored for one year or less at + 30°C max.)
Nominal capacity
7.7 Ah
(at 4 mA + 20 °C 2.0 V cut-off. The capacity restored by the cell varies
according to current drain, temperature and cut-off)
according to current drain, temperature and cut-off)
Open circuit voltage
(at + 20°C)
3.67 V
Nominal voltage
(at 0.5 mA + 20°C)
3.6 V
Nominal energy
27.72 Wh
Pulse capability: Typically up to 300 mA
(300 mA/0.1 second pulses, drained every 2 mn at + 20°C from undischarged cells with 10 µA
base current, yield voltage readings above 3.0 V. The readings may vary according to the pulse
characteristics, the temperature, and the cell’s previous history. Fitting the cell with a capacitor
may be recommended in severe conditions. Consult Saft)
(300 mA/0.1 second pulses, drained every 2 mn at + 20°C from undischarged cells with 10 µA
base current, yield voltage readings above 3.0 V. The readings may vary according to the pulse
characteristics, the temperature, and the cell’s previous history. Fitting the cell with a capacitor
may be recommended in severe conditions. Consult Saft)
Maximum recommended continuous current
150 mA
(Higher currents possible, consult Saft)
Storage
(recommended)
+ 30°C (+ 86°F) max
(for more severe conditions, consult Saft)
Operating temperature range
- 60°C/+ 85°C
(Operation above ambient T may lead to reduced capacity and
(- 76°F/+ 185°F)
lower voltage readings at the beginning of pulses. Consult Saft)
Physical characteristics
Diameter (max)
26.0 mm (1.02 in)
Height (max)
49.1 mm or 50.4 mm
(1.93 in or 1.98 in)
depending on finish type
Typical weight
48 g (1.7 oz)
Li metal content
approx. 2.0 g
Available termination suffix
CNR
radial tabs
3 PF, 3 PF RP
radial pins
CNA (AX)
axial leads
FL
flying leads... etc.