Fluke 1503 Insulation measuring device, 500V, 1000 V (+20%, -0%) 2427883 Manuale Utente
Codici prodotto
2427883
1507/1503
Users Manual
Users Manual
6
Table 3. Buttons and Indicators
Button/
Indicator
Description
A
Press the blue button to select alternate
measurement functions.
measurement functions.
E
Press to configure the Tester for a
polarization index or dielectric absorption
ratio test. The test will start when you press
the
polarization index or dielectric absorption
ratio test. The test will start when you press
the
T
button.
C
Sets a pass/fail limit for insulation tests.
L
Test lock. When pressed before the
T
button, the test remains active until you
press the lock or test button again to
release the lock.
press the lock or test button again to
release the lock.
H
Turns the backlight on and off. The
backlight goes off after 2 minutes.
backlight goes off after 2 minutes.
Button/
Indicator
Description
T
Initiates an insulation test when the rotary
switch is an
switch is an
INSULATION
position. Causes the
Tester to source (output) a high voltage
and measure insulation resistance.
and measure insulation resistance.
Initiates a resistance test when the rotary
switch is in the ohms position.
switch is in the ohms position.
I
Unsafe voltage warning. Indicates 30 V or
greater (ac or dc depending on the rotary
switch position) is detected on the input.
Also appears when the display shows
greater (ac or dc depending on the rotary
switch position) is detected on the input.
Also appears when the display shows
0L
in
the
b
switch positions, and when
batt
appears on the display. The
Z
also appears
when insulation test is active.
J
Pass indicator. Indicates when the
insulation resistance measurement is
greater than the selected compare limit.
insulation resistance measurement is
greater than the selected compare limit.