Axis 243SA 0256-004 Manuale Utente

This section describes how to configure AXIS 243SA for alarm handling. Various actions 

can be configured to run when certain types of events occur.

Event Servers are used for receiving uploaded image files and/or notification messages. To 

set up an Event server for your AXIS 243SA, go to Setup > Event Configuration > Event 

Servers and enter the required information according to the selected server type.

For details on each setting, please refer to the online help

available from each web 

page.

The images in pre-trigger and post-trigger buffers will be lost if the connection to the event server fails.

When the setup is complete, the connection can be tested by clicking the Test button (the 

test takes approximately 10 seconds). 

A set of parameters describing how and when the video server is to perform certain actions

- the circumstances that start an event

Example: at a signal from an external device, such as a 
door switch or a motion sensor

Scheduled Event (see page 34) - the circumstances that start an event

Example: at a pre-programmed time