Axis 243SA 0256-004 Manuale Utente

DNS configuration
DNS (Domain Name Service) provides the translation of host names to IP addresses on 

your network.

Obtain DNS server address via DHCP - automatically use the DNS server settings provided 

by the DHCP server. Click the View button to see the current settings.

Use the following DNS server address - enter the desired DNS server by specifying the 

following:

Domain name - enter the domain(s) to search for the host name used by the Axis video 

server. Multiple domains can be separated by semicolons (;). The host name is always the 

first part of a Fully Qualified Domain Name, for example, myserver is the host name in the 

Fully Qualified Domain Name myserver.mycompany.com where mycompany.com is the 

Domain name.

DNS servers - enter the IP addresses of the primary and secondary DNS servers.

NTP Configuration
Obtain NTP server address via DHCP - use a DHCP server to automatically find an NTP 

server to synchronize clock of the Axis video server with the other devices on the network.
Use the following NTP server address - use the host name or IP address of a specific NTP 

server for time synchronization.

Host name configuration
The AXIS 243SA can be accessed using a host name, instead of an IP address. The host 

name is usually the same as the assigned DNS Name.

For more information, please see the online help

.

Link-Local IPv4 Address
This is enabled by default and assigns the AXIS 243SA an additional IP address for use 

with UPnP™. AXIS 243SA can have both a Link-Local IP and a static or DHCP-supplied IP 

address at the same time - these will not affect each other. 

HTTP 
The default HTTP port number (80) can be changed to any port within the range 

1024-65535. This is useful for simple port mapping, for example.