NOXON B1 10800 Dépliant

       TERRATEC NOXON B1 - Quick Start Guide

Thank you for buying purchasing a TERRATEC product. Before use, please read the instructions care-

fully and keep them for later reference. 

Before the B1 is used for the first time, it needs to be charged up for at least 30 minutes. To do 

this, connect the NOXON B1 to the USB charger provided using the USB cable supplied. A red LED 

comes on to indicate the unit is charging. 
It can take the unit up to 5 hours to charge completely. Once connected to the charger, the NOXON B1 

can be used after 30 minutes with the battery still charging. 
When the red LED goes out, the battery is fully charged. 
Connecting

Connect the plug on the audio cable supplied to the audio output of the NOXON B1 and connect the other 

end of the cable to your active loudspeaker or stereo system.
Switching on 

Hold the on/off button down for about 10 seconds until the blue LED starts flashing quickly (about 4 times 

a second). The device is now in detection mode (Bluetooth pairing) and is ready to connect to your 

output device.
Now activate the Bluetooth function on your output device (smartphone, tablet, Mac or computer) and it 

will automatically search for new Bluetooth devices.  

 

The NOXON B1 appears in the list of available devices and can be selected as the preferred audio device. 

The blue LED lights up continuously as soon as the connection is established. The Bluetooth Pairing 

process only needs to be carried out once. In future, you can simply switch the device on (by press-

ing the button for 4 seconds) to establish a connection.
Switching off 

The B1 switches off automatically if there is no Bluetooth connection. It can also be switched off manu-

ally by holding the button for approx. 4 seconds.

TT601670