Sangean DAB Digital Radio DPR2 DPR2 Manuale Utente

18

Your radio will normally scan for FM broadcasts which are strong
enough to give good reception. However, you may wish the Auto-scan
function to be able to find weaker signals, possibly from more distant
radio transmitters. Your radio includes a local/distant option for the
Auto-scan function.

1. Press the On/Off button to switch on your radio.

2. If needed, press the Band button to select the FM band.

3. Press and hold down the Advanced info button until “FM Scan Zone“
    appears on the display.

4. Press and release the Tuning control to select FM Scan Zone
    then rotate the Tuning control to choose between Local and
    Distant options, press and release the Tuning control to choose.
    The Distant option will allow the radio to find weaker signals
    when scanning.

5. The radio will then revert to the normal information display.
    The Local or Distant setting is stored in the radio and remains in
    force until changed or until a System Reset.

Note:
The initial setting (out of box or after s System Reset) causes the radio
is ignore weak (distant) signals.