Perfectpro Bathroom Radio, Black RB1 Scheda Tecnica

 

DRC can make quieter sounds easier to hear when the radio is used in a noisy 

environment.

1.  In DAB mode, press the Menu button, the display shows “Full scan”.

2.  Rotate the Tuning knob until the display shows “DRC value”. Press the Tuning  

 knob.

3.  Rotate the Tuning knob to select required DRC setting (default is Off).

 

 

DRC Off 

  DRC is switched off. Broadcast DRC will be ignored.

 

 

DRC Low 

  DRC level is set to low that sent by broadcaster. 

 

 

DRC High 

  DRC is set as sent by broadcaster.

4.  Press the Tuning knob to confirm the setting. The display will return to normal radio

 display.

Note: Not all DAB broadcasts use the DRC function. If the broadcast does not provide 

DRC information, the DRC setting in the radio will have no effect.

If you move to a different part of the country, some of the stations which were listed 

may no longer be available. Also, from time to time, some DAB services may stop 

broadcasting, or may change location or frequency. The Prune stations function will 

delete the unavailable DAB stations from your station list.

1.  In DAB mode, press the Menu button, the display shows “Full scan”.

2.  Rotate the Tuning knob until the display shows “Prune”. 

3.  Press the Tuning knob to enter the setting.

4.  Rotate the Tuning knob to select between “Yes” or “No” (default is No).

 

Select “Yes” to enable this function if required, otherwise, select “No”.

5.  Press the Tuning knob to confirm your setting. The display will return to normal

 

radio display.

Note: If you have move the radio to a different part of the country, you should also carry 

out a search for new stations (please see the section “Finding new stations – DAB”).

 

   

1.  Press the On/Off button to turn on the radio.

2.  Select the FM waveband by pressing the Source button.

3.  If this is the first time to switch to FM mode, the station in preset 1 will be played.

 

If the radio has been used before, the last listened station will be played.

4.  To seek station, press the Tuning knob. The scan stops automatically when it finds

a station of sufficient strength.

5.  After a few seconds, the display will update and show station name if RDS    

 

information is being received.

6.  To find other stations, press the Tuning knob again.

7.  To seek station in an opposite direction, rotate the Tuning knob clockwise (to  

 

scan from low frequency to high frequency) or rotate anti-clockwise (to scan from  

 

high frequency to low frequency), and press the Tuning knob. 

8.  When the waveband end is reached, the radio will recommence tuning from the  

 

opposite waveband end.

Manual tuning – FM 

1.  Press the On/Off button to turn on the radio.

2.  Select the FM band by pressing the Source button.

3.  Rotate the Tuning knob to reach the required FM station.

 

The radio will change the frequency in steps of 50 kHz.

4.  Rotate the rubber antenna to get the best reception. If the radio is tuned to a station  

of sufficient signal strength with RDS information present, the display may change

 

to show the station name.

5.  When the waveband end is reached, the radio will recommence tuning from the  

 

opposite waveband end.

RDS (Radio Data System) is an information system which inaudible digital information is 

transmitted in addition to the normal FM radio programme. When the radio is receiving a 

RDS station and the reception strength is sufficient, the station name will appear in the

display. It may take some time before the RDS information is available.

 

1.  When you are listening to a FM station with RDS system, repeatedly press the  

  Info button to cycle through the information. This will only function if the   

 reception level is sufficient and clear.

 

  a. Radio text (RT) 

Displays the message about the station being    

 

   

listened to as ticker text.

 

  b. Program type (PTY)  Displays the type of station being listened to, e.g.  

 

   

Pop, Classic, News, etc.

 

  c. Frequency 

Displays the frequency of the station being listened to.

 

  d. Time & date 

Displays the current time (24 hour clock) and date.

 

  e. Signal level 

Displays the signal strength.

G B