Brueder Mannesmann LED-interior lighting UP4D22 Scheda Tecnica
Codici prodotto
UP4D22
LED Interior Light 24 LED
Version 02/10
Item-No. 85 69 93
Intended Use
The 24 LED interior light is intended as a light source and for lighting effects inside
vehicles.
Use of this light is not permitted within the scope of the German road traffic regulations.
Please acquaint yourself with the applicable laws and regulations in your country.
This product may only be operated if it is connected to a 12V DC car power supply,
with the negative terminal of the car battery connected to the body. It may only be
installed and operated in vehicles supplied with this kind of voltage. Never connect the
light to any other voltage supply.
Only to be used in a vehicle or closed rooms, i.e. not outdoors. Contact with moisture
or damp must be avoided at all times. During installation, the user must ensure that the
light is protected against moisture and damp.
Any other use than that described above, could lead to damage to this product and
involves the risk of short circuits, fire, electric shock, etc.
No part of the product should be modified or reassembled.
The safety instructions must be observed at all times.
vehicles.
Use of this light is not permitted within the scope of the German road traffic regulations.
Please acquaint yourself with the applicable laws and regulations in your country.
This product may only be operated if it is connected to a 12V DC car power supply,
with the negative terminal of the car battery connected to the body. It may only be
installed and operated in vehicles supplied with this kind of voltage. Never connect the
light to any other voltage supply.
Only to be used in a vehicle or closed rooms, i.e. not outdoors. Contact with moisture
or damp must be avoided at all times. During installation, the user must ensure that the
light is protected against moisture and damp.
Any other use than that described above, could lead to damage to this product and
involves the risk of short circuits, fire, electric shock, etc.
No part of the product should be modified or reassembled.
The safety instructions must be observed at all times.
Safety Instructions
The warranty will be void in the event of damage caused by failure to
observe these safety instructions! We will not assume any responsi-
bility for consequential damage!
We do not accept liability for damage to property or persons arising
from improper use or as a consequence of ignoring the safety instruc-
tions! The warranty will be void in such cases.
An exclamation mark inside a triangle indicates important instructions
in the operating manual.
Please read all the instructions before using this device, they include
important information on its correct operation.
observe these safety instructions! We will not assume any responsi-
bility for consequential damage!
We do not accept liability for damage to property or persons arising
from improper use or as a consequence of ignoring the safety instruc-
tions! The warranty will be void in such cases.
An exclamation mark inside a triangle indicates important instructions
in the operating manual.
Please read all the instructions before using this device, they include
important information on its correct operation.
• Prior to commissioning, check the device for damage. If the device is damaged, do
not put it into use.
• For safety and licensing reasons, unauthorised conversion and/or modifications to
the product are not permitted.
• The device may only be used with a 12V DC vehicle power supply (with the negative
terminal of the battery connected to the body of the vehicle). Never connect the light
to any other voltage supply.
to any other voltage supply.
• Extra care should be taken when using the device for the first time. Therefore, please
follow the operating instructions carefully.
• Consult an expert if you are unsure of how to use or connect the light, or if the safety
instructions are not clear to you.
• Check the light and the connection cables from time to time for damage. If the light
or the connection cables become damaged, the repair must be carried out by an
expert.
expert.
• Avoid heavy mechanical stress on the light and do not expose it to high temperatures,
strong vibrations or dripping or spray water.
• Never pour any liquids above the light. There is a high risk of fire. If any liquid should
nevertheless penetrate the product, immediately disconnect it from the power sup-
ply and contact a specialist.
ply and contact a specialist.
• Keep the unit out of the reach of children. Keep the light out of the reach of children.
• Do not leave packaging material lying around carelessly. It may become a dange-
• Do not leave packaging material lying around carelessly. It may become a dange-
rous plaything for children.
• If in doubt about how to connect the device correctly, or should any questions arise
that are not answered in these operating instructions, please contact our technical
advisory service or another specialist.
advisory service or another specialist.
• Please, also observe the additional safety instructions in each individual section of
these instructions.
O P E R A T I N G I N S T R U C T I O N S
www.conrad.com
Installation
Modifications to the vehicle, which are made necessary due to the
installation of the light, must always be carried out in such a manner
that neither the traffic safety nor the designed stability of the car is
impaired. If you are in doubt, when selecting a place for installation,
consult your car dealer.
When installing the light, take into consideration the risks that can arise
from devices being torn away in the event of an accident. Therefore,
fasten the light securely and in a location where it will not pose a risk
to passengers.
installation of the light, must always be carried out in such a manner
that neither the traffic safety nor the designed stability of the car is
impaired. If you are in doubt, when selecting a place for installation,
consult your car dealer.
When installing the light, take into consideration the risks that can arise
from devices being torn away in the event of an accident. Therefore,
fasten the light securely and in a location where it will not pose a risk
to passengers.
• Open the cover of your vehicle’s interior lighting (see the operating manual for your
vehicle).
• Remove the existing light source.
• Insert one of the adapters enclosed into the vehicle’s light socket.
• Connect the power cord to the inserted adapter.
• Switch the interior light on. If it does not light up, turn the adapter in the light socket
• Insert one of the adapters enclosed into the vehicle’s light socket.
• Connect the power cord to the inserted adapter.
• Switch the interior light on. If it does not light up, turn the adapter in the light socket
by 180°.
• Fasten the light inn place with the enclosed adhesive pad.
• Close the cover.
• Close the cover.
Use
There are two modes of operation. It can be used to provide white interior light or for
audio-controlled lighting effects.
To change between the two modes briefly turn the light off and on again.
The sensitivity of the audio-control can be adjusted.
audio-controlled lighting effects.
To change between the two modes briefly turn the light off and on again.
The sensitivity of the audio-control can be adjusted.
Never use the lighting effect during normal driving, since this kind of
illumination can distract the driver from paying attention to fellow
road users.
illumination can distract the driver from paying attention to fellow
road users.
• When the interior light is switched on, it will provide white light.
• To change to the effect mode, turn off the interior light and turn it on again after 3-10s.
• When it is in the effect mode, the LEDs will flash with the beat of the music.
• To adjust the sensitivity of the control, carefully adjust the controller on the board
• To change to the effect mode, turn off the interior light and turn it on again after 3-10s.
• When it is in the effect mode, the LEDs will flash with the beat of the music.
• To adjust the sensitivity of the control, carefully adjust the controller on the board
using the screwdriver enclosed. The lighting effect should move with the beat of the
music.
music.
• To return to normal mode (white light), turn off the interior light briefly and then on
again.
Disposal
Please dispose of the product, when it is no longer of use, according to the
current statutory requirements.
current statutory requirements.
Technical Data
Operating voltage
12Vdc
Power input
60mA (normal operation)
120mA max. (effect mode operation)
120mA max. (effect mode operation)
Light source
24 LEDs
Socket adapter
BA9s / glass socket W2,1x9,5d / Tube10x28mm
Dimensions
53 x 38 x 6mm
Weight
10g
These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240
Hirschau (www.conrad.com).
Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or
the capture in electronic data processing systems require the prior written approval by the editor.
Reprinting, also in part, is prohibited.
the capture in electronic data processing systems require the prior written approval by the editor.
Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in
technology and equipment reserved.
technology and equipment reserved.
© Copyright 2010 by Conrad Electronic SE.