Cellpack Y0/V/AK/EG/UE 299001 Scheda Tecnica
Codici prodotto
299001
Status: 27.07.2011
Trade name: Giessharz-Polyol LG
Product no.: A7
Version: 1.0.0 / GB
EC safety data sheet
page 3(5)
Storage
Requirements for storage rooms and vessels
Keep container tightly closed. Never use pressure to empty: container is not a pressure vessel. No smoking.
Prevent unauthorized access!; Containers which are opened must be carefully resealed and kept upright to
prevent leakage.
Prevent unauthorized access!; Containers which are opened must be carefully resealed and kept upright to
prevent leakage.
Advice on storage assembly
Keep away from oxidizing agents, from strongly alkaline and strongly acid materials.
Further information on storage conditions
Always keep in containers of same material as the original one. See also instructions on the label. Avoid heating
and direct sunlight. Keep container dry in a cool, well-ventilated place. Protect from heat and direct sunlight. store
at 15 - 30 °C.
and direct sunlight. Keep container dry in a cool, well-ventilated place. Protect from heat and direct sunlight. store
at 15 - 30 °C.
8.)
Exposure controls / personal protection
Exposure limit values
N O N E
Exposure controls
Occupational exposure controls
Provide good ventilation.
Personal protective equipment
Respiratory protection
If workplace exposure limits are exceeded, a respiration protection approved for this particular job must be worn.
In case of aerosol and mist formation, take appropriate measures for breathing protection in the event workplace
threshold values are not specified.
In case of aerosol and mist formation, take appropriate measures for breathing protection in the event workplace
threshold values are not specified.
Hand protection
Use protective gloves (DIN EN 374). Please read the protective glove manufacturer
’s information relating to
permeation rates and breakthrough times and the particular conditions at the workplace.
Eye protection
Use safety goggles.
Skin protection
Personal should wear antistatic clothings made of natural fiber or of high temperature resistant synthetic fiber. All
parts of the body should be washed after contact.
parts of the body should be washed after contact.
General protective and hygiene measures
Do not eat or drink during work - no smoking. Wash hands before breaks and after work. Do not inhale vapours.
9.)
Physical and chemical properties
General information
Form
liquid
Colour
grey; light
Odour
characteristic
Important health, safety and environmental information
Flash point
Value
>
150
° C
Method
ISO 2592
Density
Value
1,03
g/cm³
Method
ASTM D 792
Reference temperature
23
° C
Viscosity
Value
800
mPa*s
Method
ISO 2555
Reference temperature
23
° C