Apem 647H/2 10A High Current Toggle Switch, 647H/2 Scheda Tecnica
Codici prodotto
647H/2
A P E M
D-4
D
IB & IS SERIES
SEALED MOMENTARY PUSHBUTTON SWITCHES
Distinctive features and overview
•
MORE COMPACT
These new pushbutton switches have a
behind-panel depth of only 13 mm
and fit into a Ø 13,6 mm (.535) panel
cut-out.
The bushing-bezel assembly is of
single piece construction.
behind-panel depth of only 13 mm
and fit into a Ø 13,6 mm (.535) panel
cut-out.
The bushing-bezel assembly is of
single piece construction.
IP
SERIES
IB
Snap-in
IS
Threaded
bushing
bushing
Bezel shape
R
Round
Terminals
S
Solder lug
Z1
Quick-connect
2,8 x 0,5 mm
2,8 x 0,5 mm
P
Straight PC
Electrical
function
3
Normally open
(NO)
(NO)
•
SIMPLIFIED MOUNTING
The snap-in mounting version meets
the user’s requirement for easy panel
assembly.
The thermoplastic bushing and bezel
assembly allows APEM to achieve a
50 % reduction in weight compared to
metallic models.
the user’s requirement for easy panel
assembly.
The thermoplastic bushing and bezel
assembly allows APEM to achieve a
50 % reduction in weight compared to
metallic models.
•
SEALED TO IP 67
The IB and IS pushbutton switches are
sealed to IP 67 against immersion.
The silicone membrane located be-
neath the plunger ensures sealing and
provides tactile feedback.
sealed to IP 67 against immersion.
The silicone membrane located be-
neath the plunger ensures sealing and
provides tactile feedback.
Plunger colour
1
Blue
2
Black
3
Green
5
Yellow
6
Red
7/1
White
8
Chrome plat.
9
Orange
Contacts
AD
Silver, gold
plated
plated
Finish
00
Black (std)
08
Chrome plated
(IS only)
(IS only)
10
White
Option
104
High Plunger
ABOUT THIS SERIES
On the following pages, you will find successively :
- specifications
- model structure of switches and options in the same order as in above chart
On the following pages, you will find successively :
- specifications
- model structure of switches and options in the same order as in above chart
Dimensions :
first dimensions are in mm while inches are shown as bracketted numbers.
A sealing boot
is available to protect the switches against frost and sand. It is presented at the end of the series and in section N.
Mounting accessories
: Standard hardware supplied : 1 flat seal (IB series)
1 hex nut 14 mm (.551) across flats and 1 flat seal (IS series). The hex nut is presented in section N (part number U166).
Packaging unit
: 50 pieces
NOTICE
: please note that not all combinations of above numbers are available.
Refer to the following pages for further information.