Allied Telesis 8 Slot Advanced Layer 3 Modular Switch AT-SBX908-00 Scheda Tecnica

Expandability

• 8 high speed 60Gbps expansion bays
• 2 x 80Gbps stacking connectors on the rear

of the chassis, for use as high availability
stacking links for 2 SwitchBlade x908s

3

• Stacking of up to 4 SwitchBlade x908s using

the stacking module, XEM-STK

4

• IPv6 routing option

Performance

• 640Gbps Switching fabric
• 262Mpps forwarding rate (with current XEM

modules. Fabric is capable of up to 476Mpps)

• Extensive wire-speed traffic classification for

ACLs and QoS

• Supports 10KB Jumbo frame size for data

center and server aggregation applications

• Wire-speed multicasting

Flexibility & Compatibility

• Eight 60Gbps expansion bays supporting a

choice of modules, including 1x 10GbE,
12 x 1GbE (SFP), 12 x 1GbE (RJ45), and
stacking for port flexibility and application
versatility

• XEM modules compatible with x900-24X

and x900-12XT/S

• Gigabit SFP ports will support any

combination of 10/100/1000BASE-T,
100BASE-FX, 100BASE-BX, 1000BASE-SX,
1000BASE-LX, 1000BASE-ZX or
1000BASE-ZX CWDM SFPs

Reliability

• Modular AlliedWare Plus operating system
• Dual hot swappable PSUs with 1 + 1

redundancy

• Dual feed support - a separate power circuit

can feed each power supply providing extra
reliability

• Hot-swappable XEMs
• Hot swappable fan modules
• Full environmental monitoring of PSUs, fans,

temperature and internal voltages, with
SNMP traps to alert network managers in
case of any failure

Resiliency

• STP, RSTP, MSTP (802.1s) 
• Link Aggregation (802.3ad LACP)
• VRRP
• EPSR

VLAN Support

• Supports 4096 VLANs
• Private and Dynamic VLANs
• VLAN Double Tagging

Security

• Private VLANs, providing security and port

isolation of multiple customers using the
same VLAN

• 802.1x support

Quality of Service

• Policy based QoS features
• Highly configurable traffic classification
• Extensive remarking capabilities, to fit in

with any network’s QoS scheme

• Control plane traffic prioritization
• Mixed scheduling, to support complex traffic

queuing requirements

• 8 QoS queues per port
• Two-rate three-color (green, yellow, red)

bandwidth metering, with burst sizes for
improved TCP-IP bandwidth limiting
performance and bandwidth resolution
down to 1Kbps

• Low switching latency essential for Voice

over IP (VoIP) and real-time streaming media
applications

Management

• Out of band 10/100/1000 Ethernet

management port and console management
port, both on the front panel for ease of
access

• An SD memory card socket on the front

panel, allowing software release files,
configurations and other files to be stored for
backup and distribution to other switches

• Port mirroring
• SSH and SNMPv3 for secure management
• RADIUS Authentication

Allied Telesis

www.alliedtelesis.com

Datasheet | 

Switches

Advanced Layer 3 Modular Switch

Datasheet | 

Switches

The Allied Telesis SwitchBlade

® 

x908 industry

leading modular switch incorporates eight high-
speed 60Gbps expansion bays, delivering a new
generation of high performance. The SwitchBlade
x908 provides scalable and versatile switching
solutions for today’s Enterprise networks.

The highly configurable SwitchBlade x908 3RU
modular switch combines an advanced IPv4 L3
feature set and comprehensive IPv6 routing
features, with wire-speed IPv6 hardware capability,
future proofing the network.

Featuring dual hot-swap PSUs, an advanced QoS
feature set, multicasting support, and LAN resiliency
support, the SwitchBlade x908 also provides
Service Provider capabilities such as a large L3
route table, and EPSR support.

Stacking between two units is supported via fixed
stacking connectors on the rear of the chassis,
providing 160Gbps of stacking bandwidth. Stacking
of more than two units is via expansion modules
(XEMs) on the front panel.

The SwitchBlade x908 incorporates the
AlliedWare Plus™ Operating System, using an
industry standard Command Line Interface (CLI),
facilitating effortless manageability.

Expansion module options:

• AT-XEM-STK Stacking XEM
• AT-XEM-1XP 1 x 10GbE (XFP) 
• AT-XEM-12S 12 x 100/1000BASE-X SFP ports 
• AT-XEM-12T 12 x 10/100/1000BASE-T  

(RJ-45) ports

• Future modules to include 12 x GbE with PoE

1

and 2 x 10GbE

2

Port Density:

• 96 x GbE ports per switch (with PoE

1)

• 8 x 10GbE ports (16 with XEM-2XP)

2

per switch

•1344 x GbE ports per rack (14 units)
•112 x10GbE ports per rack (224 with XEM-2XP)

2