Zettler Electronics AZ733-2C-6DE Miniature PCB Mount Power Relay 6Vdc 2 CO, DPDT AZ733-2C-6DE Scheda Tecnica
Codici prodotto
AZ733-2C-6DE
GENERAL DATA
Life Expectancy
Minimum operations
Mechanical
1 x 10
7
Electrical
1 x 10
5
at 10 A 250 VAC Res.
Operate Time (typical)
8 ms at nominal coil voltage
Release Time (typical)
5 ms at nominal coil voltage
(with no coil suppression)
(with no coil suppression)
Dielectric Strength
5000 Vrms contact to coil
(at sea level for 1 min.) 1000 Vrms between open contacts
3000 Vrms between contact sets
Insulation
1000 megohms min. at 20°C, 500 VDC,
Resistance
50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
-40°C (-40°F) to 85°C (185°F)
Storage
-40°C (-40°F) to 105°C (266°F)
Vibration
0.062" (1.5 mm) DA at 10–55 Hz
Shock
10 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp.
80°C (176°F)
Max. Immersion Time
30 seconds
Weight
18 grams
Packing unit in pcs
50 per plastic tray / 500 per carton box
ZETTLER
electronics GmbH
Fax +49 89 800 97 200 www.ZETTLERelectronics.com
office@ZETTLERelectronics.com
0
97
800
89
+49
Tel.
Germany
Puchheim,
D-82178
Junkersstrasse 3,
2004-08-11
AZ733
CONTACTS
Arrangement
DPST (2 Form A)
DPDT (2 Form C)
DPDT (2 Form C)
Ratings
Resistive load:
Max. switched power: 300 W or 2500 VA
Max. switched current: 10 A
Max. switched voltage: 150 VDC* or 380 VAC
Max. switched current: 10 A
Max. switched voltage: 150 VDC* or 380 VAC
*
Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
Please contact the factory.
Rated Load
UL, CUR
10 A at 250 VAC general use, 100k cycles
10 A at 30 VDC N.O. resistive, 100K cycles
10 A at 30 VDC N.C. resistive, 50K cycles
10 A at 30 VDC N.O. resistive, 100K cycles
10 A at 30 VDC N.C. resistive, 50K cycles
1
/
4
HP at 240 VAC
1
/
8
HP at 120 VAC
TV-3 at 125 VAC (2 Form A)
TÜV
5 A at 30 VDC, 250 VAC resistive, 100k cycles
Material
Silver cadmium oxide
Resistance
< 50 milliohms initially
(24 V, 1 A voltage drop method)
(24 V, 1 A voltage drop method)
DPDT MINIATURE
POWER RELAY
POWER RELAY
FEATURES
• Dielectric strength 5000 Vrms
• Low cost
• Epoxy sealed version available
• 10 Amp switching — double pole contacts
• Isolation spacing greater than 8mm
• UL, CUR file E43203
• TÜV file R9659062
• Low cost
• Epoxy sealed version available
• 10 Amp switching — double pole contacts
• Isolation spacing greater than 8mm
• UL, CUR file E43203
• TÜV file R9659062
COIL
Power
At Pickup Voltage
257 mW
(typical)
Max. Continuous
1.9 W at 20°C (68°F) ambient
Dissipation
Temperature Rise
34°C (61°F) at nominal coil voltage
Temperature
Max. 130°C (266°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.