Zettler Electronics AZ762-1A-60DE Miniature PCB Mount Relay 60Vdc 1 NO, SPST-NO AZ762-1A-60DE Scheda Tecnica
Codici prodotto
AZ762-1A-60DE
16 A SPDT MINIATURE
POWER RELAY
POWER RELAY
FEATURES
• Dielectric strength 5000 Vrms
• 16 Amp switching
• High Inrush version (80 A) available
• AC and DC coils
• Isolation spacing greater than 10 mm
• Reinforced insulation, EN 60730-1 (VDE 0631, part 1),
• 16 Amp switching
• High Inrush version (80 A) available
• AC and DC coils
• Isolation spacing greater than 10 mm
• Reinforced insulation, EN 60730-1 (VDE 0631, part 1),
EN 60335-1 (VDE 0700, part 1)
• UL, CUR file E44211
• VDE file 40006031
• VDE file 40006031
ZETTLER
electronics GmbH
Fax +49 89 800 97 200 www.ZETTLERelectronics.com
office@ZETTLERelectronics.com
0
97
800
89
+49
Tel.
Germany
Puchheim,
D-82178
Junkersstrasse 3,
2007-02-27
AZ762
GENERAL DATA
Life Expectancy
Minimum operations
Mechanical
1 x 10
7
Electrical
1 x 10
5
at 16 A 250 VAC Res.
Operate Time (typical)
7 ms at nominal coil voltage DC coils
10 ms at nominal coil voltage AC coils
Release Time (typical)
3 ms at nominal coil voltage
(with no coil suppression)
(with no coil suppression)
Dielectric Strength
5000 Vrms coil to contact
(at sea level for 1 min.) 1000 Vrms between open contacts
Insulation
1000 megohms min. at 20°C
Resistance
500 VDC 50% RH
Insulation
C250
(according to
Overvoltage category: III
DIN VDE 0110,
Pollution degree: 3
IEC 60664-1)
Nominal voltage: 250 VAC
Dropout DC coils
Greater than 10% of nominal coil voltage
AC coils
Greater than 15% of nominal coil voltage
Ambient Temperature
At nominal coil voltage
Operating
-40°C (-40°F) to 85°C (185°F) DC coils
-40°C (-40°F) to 70°C (158°F) AC coils
-40°C (-40°F) to 70°C (158°F) AC coils
Storage
-40°C (-40°F) to 105°C (221°F)
Vibration
0.062" (1.5 mm) DA at 10–55 Hz
Shock
10 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P. C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp.
80°C (176°F)
Max. Immersion Time
30 Seconds
Weight
14 grams
Packing unit in pcs
20 per plastic tube / 1000 per carton box
CONTACTS
Arrangement
SPDT (1 Form C)
SPST (1 Form A)
SPST (1 Form A)
Ratings
Resistive load:
Max. switched power: 480 W or 4432 VA
Max. switched current: 16 A
Max. switched voltage: 150 VDC* or 440 VAC
Max. switched current: 16 A
Max. switched voltage: 150 VDC* or 440 VAC
*
Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
Please contact the factory.
Rated Load
UL, CUR
16 A at 277 VAC resistive, 100k cycles [3]
16 A at 277 VAC resistive, 50k cycles [1]
16 A at 277 VAC resistive, 50k cycles [1]
1 HP at 250 VAC (1 Form A) [1]
1
/
2
HP at 125 VAC (1 Form A) [1]
TV-5 at 125 VAC (1 Form A) [1]
16 A at 277 VAC resistive, 75k cycles [2]
B300 Pilot Duty [2]
R300 Pilot Duty [2]
16 A at 277 VAC resistive, 75k cycles [2]
B300 Pilot Duty [2]
R300 Pilot Duty [2]
VDE
16 A at 250 VAC resistive, [1] [2] and [3]
9 A at 250 VAC, inductive (Form A) [1] [2] and [3]
9 A at 250 VAC, inductive (Form A) [1] [2] and [3]
Material
Silver cadmium oxide [1] or silver tin oxide [2]
or silver nickel [3]. Gold plating available
or silver nickel [3]. Gold plating available
Resistance
< 50 milliohms initially
COIL
Power
At Pickup Voltage
200 mW (DC coil)
(typical)
.422 VA (AC coil)
Max. Continuous
1.7 W at 20°C (68°F) ambient
Dissipation
1.7 VA at 20°C (68°F) ambient
Temperature Rise
26°C (47°F) at nominal coil voltage
Max. Temperature
130°C (266°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
NEW !!!
High inrush version 80 A !!!