Zettler Electronics AZ9375-1A-12DEF PCB Mount Relay AZ9375-1A-12DEF Scheda Tecnica

1. All values at 20°C (68°F).

2. Relay may pull in with less than “Must Operate” value.

3. Specifications subject to change without notice.

113 mW

338 mW at 20°C (68°F) ambient

40°C (104°F) at nominal coil voltage

Max. 105°C (221°F)

SPST (1 Form A)

Resistive load:

Max. switched power:  150 W or 1250 VA
Max. switched current: 10 A
Max. switched voltage: 30 VDC or 277 VAC

10 A at 125 VAC, Res., 100k cycles, 90°C
10 A at 30 VDC, Res., 100k cycles, 90°C  
5 A at 250 VAC, Res.,  100k cycles, 90°C
1/10 HP at 250 VAC, 100k cycles, 85°C
1.4 FLA / 7.5 LRA at 250 VAC, 100k cycles, 85°C

Silver nickel

< 100 milliohms initially
(at 6 V, 1 A, voltage drop method)

6/27/12

• Extremely small footprint
• Thin vertical profile only 0.275" (7 mm) wide
• Dielectric strength 4000 Vrms
• Type ‘F’ 155°C wire standard
• 10 Amp switching capability
• UL, CUR file E44211

Minimum operations

5 million operations 

1 X 10

5

at 5 A, 250 VAC Res.

10 ms at nominal coil voltage

4 ms at nominal coil voltage
(with no coil suppression)

750 Vrms between open contacts

(at sea level for 1 min.) 4000 Vrms coil to contact

1000 megohms min. at 20°C, 500 VDC,

50% RH

Greater than 10% of nominal coil voltage

At nominal coil voltage

-30°C (-22°F) to 85°C (185°F)

-40°C (-40°F) to 105°C (221°F)

0.062" (1.5 mm) DA at 10–55 Hz

10 g

P.B.T. polyester

Tinned copper alloy, P.C.

270°C (518°F)

5 seconds

80°C (176°F)

30 seconds

4 grams