Hsb Industrieelektronik 011172 Time Delay Relay, Timer, SPDT-CO 24/230 Vac 011172 Dépliant
Codici prodotto
011172
Pulse generator ZTG
Serie17,5mm
universal
Serie17,5mm
universal
APPROVALS
MOUNTING
Snap-on mounting using a standard DIN rail EN 50022.
The unit is designed to allow side-by-side mounting, with an
ambient temperature of < 60°C.
The unit is designed to allow side-by-side mounting, with an
ambient temperature of < 60°C.
OPTIONS
TIMING RANGES
4 timing ranges, abjustable by DIP switch
Pulse
Pause
0,15
-
3 s
0,15 - 3 s
1,5
- 30 s
1,5 - 30 s
15
- 300 s
15
- 300 s
3,0
-
60 m
3,0
- 60 m
Other timing ranges and voltages available upon request.
PART NUMBER
011172
ZTG1
24V/230V
1 changeover
011173
ZTG2
24V/230V
2 changeover
APPLICATION
Time control
DESCRIPTION
FUNCTION
Beginning with pulse
The ZTG Pulse generator offers an independent regulation of
the pulse and pause times, which are each adjusted with two
independent potentiometers and DIP switches which are
located on the front panel of the unit. The timer can operate on
either 230V AC using terminals A1 and A2 or 24V UC using
terminals A3 and A2. The green LED indicates the connection
of the power supply.
the pulse and pause times, which are each adjusted with two
independent potentiometers and DIP switches which are
located on the front panel of the unit. The timer can operate on
either 230V AC using terminals A1 and A2 or 24V UC using
terminals A3 and A2. The green LED indicates the connection
of the power supply.
The timing begins with the connection of the power supply to
the terminals A1 and A2 or A3 and A2. The timing begins with a
pulse. This is indicated by the yellow LED. Upon completion
of the selected delay time on the potentiometer t , the output
the terminals A1 and A2 or A3 and A2. The timing begins with a
pulse. This is indicated by the yellow LED. Upon completion
of the selected delay time on the potentiometer t , the output
i
contact switches into its rest position. After completion of the
selected timing cycle on potentiometer t , the output relay
selected timing cycle on potentiometer t , the output relay
p
again switches into its working position. This sequence will
repeat itself as long as the power supply is connected. Should
the power supply be interrupted during the reset time, then the
relay returns to its original state. This also applies if the power
is disconnected during the timing period.
repeat itself as long as the power supply is connected. Should
the power supply be interrupted during the reset time, then the
relay returns to its original state. This also applies if the power
is disconnected during the timing period.
FUNCTION DIAGRAM
H S B
Industrieelektronik
HSB Industrieelektronik
Hans-Bördlein-Str. 10
97723 Reith
Hans-Bördlein-Str. 10
97723 Reith
Tel.: +49 9736 / 75759 - 0
Fax: +49 9736 / 75759 - 20
Fax: +49 9736 / 75759 - 20
info@hsb-electronics.de
www.hsb-electronics.de
www.hsb-electronics.de
Beginning with pause
The timing beginns with connection of the power supply to the
terminals A1 and A2 or A3 and A2. The timing begins with a
pause. Upon completion of the selected delay time on the
potentiometer t , the output contact switches to its working
terminals A1 and A2 or A3 and A2. The timing begins with a
pause. Upon completion of the selected delay time on the
potentiometer t , the output contact switches to its working
p
position. This is indicated by the yellow LED. After completion
of the selected timing cycle on potentiometer t , the output
of the selected timing cycle on potentiometer t , the output
i
contact switches into its rest position. This sequence will
repeat itself as long as the power supply is connected. Should
the power supply be interrupted during the duration reset time,
then the relay returns to its original state. This also applies if
the power is disconnected during the timing period.
repeat itself as long as the power supply is connected. Should
the power supply be interrupted during the duration reset time,
then the relay returns to its original state. This also applies if
the power is disconnected during the timing period.
ti
ti
pulse time
A1 (A3) / A2
15
25
A1
A2
16 18
26 28
contact 15,25
contact 15,25
16,26
ti
ti
tp
tp
tp
18,28
tp
pause time
A3
B1