Renkforce Hi-Fi Headphones Black HP-960S Manuale Utente

The headphones are designed to transform electric output signals from a headphones 

output to acoustic signals (sound waves). The product is approved for connection to 

the headphones output of audio devices only. Power is supplied via the connected 

device. 
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in 

bathrooms, must be avoided under all circumstances.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. 

If you use the product for purposes other than those described above, the product may 

be damaged. In addition, improper use can cause hazards such as short circuiting, 

fire,  electric  shock  etc.  Read  the  instructions  carefully  and  keep  them.  Make  this

product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All 

company names and product names are trademarks of their respective owners. All 

rights reserved.

•  Headphones
•  Operating instructions

warranty/guarantee.
•  The device is not a toy. Keep it out of the reach of children and pets.
•  Do not leave packaging material lying around carelessly. These may 

become dangerous playing material for children.

•  Protect the product from extreme temperatures, direct sunlight, strong 

jolts, high humidity, moisture, flammable gases, vapours and solvents.

•  Do not place the product under any mechanical stress.
•  If it is no longer possible to operate the product safely, take it out of 

operation and protect it from any accidental use. Safe operation can no 

longer be guaranteed if the product:

 - is visibly damaged, 
 - is no longer working properly, 
 - has been stored for extended periods in poor ambient conditions or 
 - has been subjected to any serious transport-related stresses.

•  Please handle the product carefully. Jolts, impacts or a fall even from a 

low height can damage the product.

•  Also observe the safety and operating instructions of any other devices 

which are connected to the product.

•  Do not wear the product in situations that require your undivided attention 

(i.e. while driving or operating machinery or tools). This is a safety hazard 

and poses a risk of injury!

•  Do not listen to music at a high volume for an extended period of time. This 

may damage your hearing.

•  Consult an expert when in doubt about operation, safety or connection of 

the device.

•  Maintenance, modifications and repairs are to be performed exclusively

by an expert or at a qualified shop.

•  If you have questions which remain unanswered by these operating 

instructions, contact our technical support service or other technical 

personnel.

•  Turn off the audio device to which you wish to connect the headphones.
•  Turn down the headphones volume on the audio device all the way.
•  Connect the jack plug to the headphones output on your audio device.
•  Turn on the audio device.
•  Adjust the volume using the volume control on your audio device.

•  The product is maintenance-free apart from occasional cleaning.
•  Never submerge the product in water to clean it.
•  Before cleaning, disconnect the product from the connected device.
•  To clean, use a clean, dry, lint-free cloth.

Electronic devices are recyclable waste and must not be disposed of in the 

household waste.
At the end of its service life, dispose of the product according to the 

relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of

the environment.

Power ....................................................max. 400 mW
Current consumption ..........................max. 5 mA
Connection ...........................................3.5 mm jack plug
Frequency range .................................15 - 22000 Hz
Sensitivity .............................................98 dB ±3 dB
Impedance ...........................................32 Ω
Operating conditions ..........................0 to +40 ºC, <70 % RH (non-condensing)
Storage conditions..............................-5 to +55 ºC, <85 % RH (non-condensing)
Cable length .........................................2.5 m
Speaker driver .....................................40 mm
Dimensions (W x H x D)......................200 x 150 x 70 mm
Weight ...................................................170 g

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). 
All  rights  including  translation  reserved.  Reproduction  by  any  method,  e.g.  photocopy,  microfilming,  or  the  capture  in  electronic  data

processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the 

technical status at the time of printing.
© Copyright 2015 by Conrad Electronic SE. 

V1_0315_02-ETS-Mkd