CHIPDRIVE MICRO PRO C USB CLOUD 2700F Scheda Tecnica
Codici prodotto
CLOUD 2700F
www.identive-group.com
© 2013 Identive Group,Inc, all rights reserved. Reproduction is prohibited without the consent of the copyright owner. All information
contained in this document is provided “AS IS”; Identive Group assumes no responsibility for its accuracy and/or completeness.
In no event will Identive be liable for damages arising directly or indirectly from any use of the information contained in this document.
contained in this document is provided “AS IS”; Identive Group assumes no responsibility for its accuracy and/or completeness.
In no event will Identive be liable for damages arising directly or indirectly from any use of the information contained in this document.
Contacts
Identive GmbH
Oskar-Messter-Str. 13
85737 Ismaning
Germany
Oskar-Messter-Str. 13
85737 Ismaning
Germany
Phone
+ 49 89 9595 5000
sales@identive-infrastructure.com
Identive Group, Inc
1900-B Carnegie Avenue
Santa Ana, CA 92705
USA
1900-B Carnegie Avenue
Santa Ana, CA 92705
USA
Phone
+ 1 888 446 9008
scmsales@identive-infrastructure.com
Identive KK
GoogolPlex Millennium Building 6F
4-4-20 Shiba, Minato-ku,
Tokyo, 108-0014, Japan
GoogolPlex Millennium Building 6F
4-4-20 Shiba, Minato-ku,
Tokyo, 108-0014, Japan
Phone
+ 81 3 6414 6611
sales@identive-infrastructure.co.jp
Identive GmbH
Unit 11, 4607-11,
The CENTRE
99 Queen´s Road Central
Hong Kong
Unit 11, 4607-11,
The CENTRE
99 Queen´s Road Central
Hong Kong
Phone
+ 852 3796 7010
sales@identive-infrastructure.com
Date of release: 2013-11-19
CLOUD 2700 R
Contact Smart Card Reader
Technical data are subject to change without notice.
Parameter
CLOUD 2700R
CLOUD 2700R with Stand Holder
Host Interface
Type
USB 2.0 CCID (USB 1.1 / 3.0 compliant)
Communication Speed
12 Mbps (USB2.0 full speed)
Smart Card Interface
Supported standards
• ISO/IEC 7816 Part 1 to 4
• EMV 2008 Ver 4.2 Level 1
• EMV 2008 Ver 4.2 Level 1
Supported Tag ICs
All major ISO/IEC 7816 compliant Smart Card IC support
Protocols
T=0, T=1
Interface speed
• up to 600 kBit/s (depending on card)
• TA1=97
• TA1=97
Clock frequency
ISO/IEC 7816 compliant up to 5 MHz, Operates up to 12 MHz
Supported smart card types
5V, 3V and 1.8V, ISO/IEC 7816 Class A/B/C
Power to smart card
60mA in Class A; 55mA in Class B; 35mA in Class C
Smart card detection
• Card present switch
• Automatic power on/off
• Short Circuit protection
• Automatic power on/off
• Short Circuit protection
Card size
ID-1
Contact type
• 8 pin ID-1 Sliding Contact Socket
• C4/C8 support
• Card detect switch
• C4/C8 support
• Card detect switch
Driver& Software
PC/SC driver
PC/SC Speci
¿ cation Ver. 2.01.09 for
• Windows® XP/Vista/7/8 (32&64Bit) / Windows® Server 2003/2008/2012 / Windows® CE 6.0, 7.0
• MacOS 10.5.x, 10.6.x, 10.7.x, 10.8.x
• Linux 2.4.x, 2.6.x (32&64Bit)
• MacOS 10.5.x, 10.6.x, 10.7.x, 10.8.x
• Linux 2.4.x, 2.6.x (32&64Bit)
Software
• PC/SC API
• CT-API (through wrapper on top of PC/SC)
• Synchronous-API (through wrapper on top of PC/SC)
• M-Card API (through wrapper on top of PC/SC)
• CT-API (through wrapper on top of PC/SC)
• Synchronous-API (through wrapper on top of PC/SC)
• M-Card API (through wrapper on top of PC/SC)
Operating Conditions
Power supply
USB Bus powered
Power consumption
< 6mA, excluding smart card; <500
A in Standby Mode
Dimension
70x60x16mm / 2.756x2.362x0.629 Inch
70x63x62mm / 2.756x2.480x2.441 Inch
Weight
66 g ± 5% / 0.15 lb ± 5%
204 g ± 5% / 0.45 lb ± 5%
Operating temperature range
0° to +50°C / +32 to +122 F
Storage temperature range
-20 to +60°C / -4 to +140 F
Operating humidity range
Up to 95% RH non condensing
Durability
Sliding Contacts 100.000 Card Insertions
MTBF
100.000 hours
Connector
1.5m USB Cable with USB Type A Connector
Status indicator
LED
Firmware
SmartOS™
Firmware in-
¿ eld upgradeable
No
Certifi cations / Compliances
Systems / Standards
EMV 2008 Ver 4.2 Level 1, ISO/IEC 7816, USB 2.0 Full Speed, CCID, Microsoft® WHQL
Regulatory / Environmental
CE, FCC, UL94, UL60950, VCCI, ICES, ANZ, CNS, HBCI, GSA APL, RoHS2, REACH, WEEE
Ordering Information
Product Part Number
905369
905369-1912
EMVCo approval of the interface module (IFM) contained in this Terminal shall mean only that the IFM has been tested in accordance and for suf
¿ cient conformance with the EMV Speci¿ cations, Version
3.1.1, as of the date of testing. EMVCo approval is not in any way an endorsement or warranty regarding the completeness of the approval process or the functionality, quality or performance of any particular
product or service. EMVCo does not warrant any products or services provided by third parties, including, but not limited to, the producer or provider of the IFM and EMVCo approval does not under any
circumstances include or imply any product warranties from EMVCo, including, without limitation, any implied warranties of merchantability,
product or service. EMVCo does not warrant any products or services provided by third parties, including, but not limited to, the producer or provider of the IFM and EMVCo approval does not under any
circumstances include or imply any product warranties from EMVCo, including, without limitation, any implied warranties of merchantability,
¿ tness for purpose, or non-infringement, all of which are expressly
disclaimed by EMVCo. All rights and remedies regarding products and services which have received EMVCo approval shall be provided by the party providing such products or services, and not by EMVCo
and EMVCo accepts no liability whatsoever in connection therewith.
and EMVCo accepts no liability whatsoever in connection therewith.