Zalman VF1000 LED Manuale

Insert the assembled VGA card into the motherboard

’

s PCIe (or AGP) slot. Use the Fixing Bolt to secure the

VGA card onto the computer case. If the VGA card has a power connector on it, then remember to plug in the
power cable.

PCIe Slot

Fixing Bolt

※

The specifications of any product may change without prior notice to improve performance.

5

①

① Installing FAN MATE 2 on the  Inside of the System     ②

② Installing FAN MATE 2 on the Outside of the System

Connect  the  appropriate  3-pin  connector  on  the
cable  to  the  motherboard  fan  header  and  the
VF1000 LED fan connector. 

Pull the 6-pin connector out of the system through
the  back  and  connect  it  to  FAN  MATE  2,  which
should be installed on the case using the included
Double-Sided tape (

⑫).

◆ When the RPM Control Knob on FAN MATE 2 is turned fully counter-clockwise, the fan operates in Silent

Mode. Turned fully clockwise, it operates in Normal Mode. You can select the desired fan RPM by turning
the knob.

※ Performance can be increased by adjusting the RPM control knob of the FAN MATE 2. 

Note) FAN MATE 2 has been specifically designed for the fan of this product. 

Zalman Tech Co., Ltd. is not responsible for any damage to systems or VGA Chipsets caused by
using it with other types of fans.

RPM Control Knob

Fan Connector

(VF1000 LED)

Motherboard

Double - Sided Tape

FAN MATE 2

6-Pin

Connector