Unold Hair clipper Red (metallic) 87853 Manuale Utente

Codici prodotto

87853

BeFore uSe / chargIng

1. Remove all packaging materials and transport safeguards.

Due to danger of suffocation, keep children away from

the packaging materials.

2. The appliance is not yet ready for use when it leaves the

factory; it must first be completely charged.

3. Connect the power cord to the charging station.

4. Plug the mains plug of the power cord into an electrical

outlet (220 V~, 50/60 Hz).

5. Ensure that the appliance is switched off.

6. Place the switched-off appliance in the charging station.

Ensure that the appliance is inserted correctly, otherwise

it cannot be correctly charged.

7. Ensure that the charging station is stable.

8. Connect the jack plug of the power cord to the socket of

the charging station.

9. The charging time is at least 16 hours (overcharging is

technically impossible).

10. Now the appliance is ready for operation.

caution: You can also use a conventional type

aa battery (1.5 v) to operate the appliance.

however, only use such a battery if the appliance

is completely discharged, to prevent damage to the

appliance.

oPeratIon wIth attachment comB

1. Ensure that the appliance is charged.

2. If you want to use the attachment comb, fit it onto the

appliance (see illustration). Hold the appliance firmly

with one hand, with your other hand fit the attachment

comb onto the appliance by inserting it onto the shaving

head from above. The comb must audibly click into

place, only thereafter is the comb properly seated on the

appliance.

3. You can select from three cutting lengths (2, 4 and 6

mm). For selection, slide the attachment comb into the

desired position.

4. Switch on the appliance via the “ON/OFF” button.

Caution: The blades of the shaving head are sharp -

danger of injury!

Place the appliance with the attachment comb on the

skin, if possible always work counter to the direction of

hair growth.

5. Cut the hair to the desired length. If hair is very long, we

recommend that you first cut it with scissors.

6. When cutting hair with the appliance, always pause and

check the result. Thus you avoid cutting off too much

hair.

7. If hair has been caught in the shaving head, switch off

the appliance and clean the shaving head, as described

in the chapter, “Cleaning and care”.